





Set of 7 x 20 g pigment paste opaque | FPN
Set of 7 x 20 g pigment paste opaque | FPN
- Product No.:
- BM-FPN-SET
- Shipping time:
-
ca. 1-3 days (abroad may vary)
- Stock:
- Piece
Set of 7 x 20 g Pigment paste (liquid) | FPN
The opaque pigment pastes consist of high quality pigments, oil and certain tensides. The pigment pastes are free of solvents and volatile organic compounds. The pigment pastes are used for colouring of coatings.
Properties and fields of application:
- Suitable for colouring solvent free epoxy resin and polyurethane systems
- Due to its high pigment concentration very economical in consumption
- good colour fidelity and reproducibility
- Good colouring
Mixing ratio (guide formulation):
Coatings | 10 - 15 % (by weight) |
Top coat systems | 5 - 10 % (by weight) |
Casting and laminate resin | 1 - 5 % (by weight) |
This product is compatible with (for example):

The Epoxy-System E300GB is an unfilled, low-viscosity combination of resin and hardener with working time (pot life) more than 300 minutes. Usable for epoxy casting of medium thickness (up to approx. 50mm* depending on surface, temperature geometries and casting quantity (volume).
Transparent, clear
Transparent, clear
Shippingtime:
ca. 1-3 days
from 25,90 EUR
Shippingtime:
ca. 1-3 days

- Transparent, low shrink-casting with tacky-free surfaces
- Very good flow behaviour (low-viscosity)
- Cold-hardening, demouldable at room-temperature
- High fillable casting resin
- Cause pressure-resistant and impact-resistant (tough) moulds / components with high strength and very less shrinkage
Shippingtime:
ca. 1-3 days
from 5,50 EUR
Shippingtime:
ca. 1-3 days
This product is similar to:

The hardener HP-HTE300RI allows a pot-life of 300 minutes.
Base of the series HP-E3000RI is an unfilled epoxy-resin, which is mixable with different harderners for severals applications.
The series is usable for hand-laminating, too.
Vacuum Infusion, Pressure Injection
Shippingtime:
ca. 1-3 days
from 16,50 EUR
Shippingtime:
ca. 1-3 days