







Casting System - Epoxy Resin | HP-E300GB
Casting System - Epoxy Resin | HP-E300GB
- Product No.:
- HP-E300GB
- Shipping time:
-
ca. 1-3 days (abroad may vary)
- Stock:
- Package
Casting system, transparent | Epoxy Resin System HP-E300GB
The Epoxy-System E300GB is an unfilled, low-viscosity combination of resin and hardener with working time (pot life) more than 300 minutes.*
Usable for epoxy casting of medium thickness (up to approx. 50mm* depending on surface, temperature geometries and casting quantity (volume) - further information: technical data sheet).
Usable for epoxy casting of medium thickness (up to approx. 50mm* depending on surface, temperature geometries and casting quantity (volume) - further information: technical data sheet).
Features & Benefits:
-
Transparent, low shrink-casting with tacky-free surfaces
-
Very good flow behaviour (low-viscosity)
- Cold-hardening, demouldable at room-temperature, applicable at slightly increased temperatures
- High fillable casting resin
- Cause pressure-resistant and impact-resistant (tough) moulds / components with high strength and very less shrinkage
-
Foundry patterns, die plates, reproduction patterns
-
Building of medium moulds and castings
-
Encapsulation of decorative elements, rivertables
- Levelling compound / injection resin for structural repairs
- ...
For a better UV resistance, a suitable clear coat (HP-PUR) should be applied. Furthermore our HP-BEL91 UV-Stabilizer can be add to the epoxy resin or clear coat, in order to give a better protection and improve the UV resistance in a long-term.
During the hardening process, energy can be released in the form of heat, hence a cooling/heat exchanging should be provided in order to prevent hot spots.
Product Properties Epoxy Resin E300GB
- Colouring: transparent
- Mixing ratios: 100 parts resin / 35 parts hardener (by weight)
- Working Time (pot life): 300 min (at 20 °C or 68 °F)
- Working Temperature: 20 - 30°C

Working notes and decision guidance for Epoxy Resins
Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.Practical tips for epoxy resins (PDF)
Decision guidance epoxy resins (PDF)
Hazard Statements
Resin:
Caution
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H411 Toxic to aquatic life with long lasting effects.



Hardener:
Caution
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.



This product is compatible with (for example):

TOP
The Epoxy-System HP-E45KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with working time (pot life) about 45 minutes. It is versatile for laminating and for bonding / gluing applications.
Bonding, Laminating, Mould Making
Shippingtime:
ca. 1-3 days
from 6,90 EUR
Shippingtime:
ca. 1-3 days
This product is similar to:

- Set consists of 7 x 20ml tubes
- Liquid colourant for transparent colouring
- Due to its high colourant concentration, very efficient consumption
- Good colouring
- Suitable for transparent resins systems
- Added quantity depends on desired colour intensity
Shippingtime:
ca. 1-3 days
18,90 EUR
0,14 EUR per ml
0,14 EUR per ml
Shippingtime:
ca. 1-3 days

- Provides a unique glitter rainbow-effect
- Suitable for dyeing solvent-free epoxy
- Ideal for casting applications such as River-Tables, jewelry production and much more
- Very efficient in consumption
- High color fidelity and reproducibility
Shippingtime:
ca. 1-3 days
3,90 EUR
0,39 EUR per g
0,39 EUR per g
Shippingtime:
ca. 1-3 days