Main page » Reinforcement Fabrics » Glass Filament Fabric Silane » Twill » 275 g/m² Glass Fabric "Silane" Twill | HP-T275E

275 g/m² Glass Fabric "Silane" Twill | HP-T275E

Name: 275 g/m² Glass Fabric "Silane" Twill | HP-T275E
SKU: HP-T275E
Price: 7.33 EUR
Availability: InStock

Product No.:: HP-T275E
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-4,9 m²: per 7,33 EUR
5-9,9 m²: per 6,85 EUR
10-24,9 m²: per 5,87 EUR
25-49,9 m²: per 4,89 EUR
50-99,9 m²: per 4,16 EUR
> 99,9 m²: per 3,55 EUR

7,33 EUR

incl. 19% tax excl. Shipping costs

m²:

Add to wish list

Ask about product

Description

Glass Fiber Fabric Silane Twill | HP-T275E

Weight:	275 g/m²
Weave:	Twill
Sizing:	Silane
Width:	100 cm

Information:

This fabric is produced with the yarn type TD37C. This yarn contains no starch, is universally applicable and fully compatible with our resins. It has a higher tensile strength, optimized impregnation properties and thus improved performance.

Areas of application:

design of models-, sport equipment, boat-, tank-, and mould making, car-parts, ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 232 g/m²
Laminate thickness: 0,31 mm
Laminate weight: 514 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Delivery notes for this product:
Delivery up to 2,5 m² only folded up. More than 3 m² only on roll.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks by working with glass fiber fabrics and epoxy resins:
Boat Building (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Glass Fabric Constructions:

Glass Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of glass fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

Glow in the dark light powder | HP-GLOW

Glow time: up to 10 hours, depending on the amount of light stored or light intensity
Ideal for casting applications such as for example River tables, jewelry floor markings, stair edges, emergency exits, varnishes, furniture etc.
Compatible with many basic materials
Charging by: UV-radiation, daylight, artificial light and many more

from 9,98 EUR

320 g/m² Glass fabric Bidiagonal | HP-B320E...

Construction:	+/-45°
Weight:	320 g/m²
Width:	127 cm

3,77 EUR

Epoxy Resin multi-purpose system 45 min...

The Epoxy-System HP-E45KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with working time (pot life) about 45 minutes. It is versatile for laminating and for bonding / gluing applications.

Bonding, Laminating, Mould Making

from 6,90 EUR

15 mm Laminating brush | HP-L1107

Width:	15 mm
Bristle:	Black China bristle
Stalk:	Wood stalk

0,85 EUR

Digital Table Scale 10Kg/1g with LCD Display...

Strain Gauge Precision Technology
Capacity: up to 10kg
Readability: 1g
Display Modes: g / kg / oz / lb / tl
Key with Full Function: ON/OFF/TARA/ZERO
Auto/Manual Shut-Off
Powered by Battery (included) or Power Adapter

39,90 EUR

This product is similar to:

Casting System - Epoxy Resin | HP-E300GB

The Epoxy-System E300GB is an unfilled, low-viscosity combination of resin and hardener with working time (pot life) more than 300 minutes. Usable for epoxy casting of medium thickness (up to approx. 50mm* depending on surface, temperature geometries and casting quantity (volume).

Transparent, clear

from 25,90 EUR

Acrylic Cast Resin | HP-A15GB

Low heat generation
Easy to use and odourless
Possible addition of water up to 5%
Mixable with dry colour pigments
Addition of cotton flakes to increase the viscosity
Working time (pot life): 10-20 minutes (100g at 20°C)

from 20,50 EUR

Desert Terrarium - low viscosity - Epoxy...

Our Epoxy Resin E25TU is low viscos and specially designed for the use in terrariums.

High UV - resistance - low viscosity for solid subsoil (oriented strand board, stone, ...)

from 14,50 EUR
36,25 EUR per

Infusion System - Epoxy - Resin component...

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The series is usable for
hand-laminating, too.

Vacuum Infusion, Pressure Injection

from 40,50 EUR

Customers who bought this product bought also the following products:

Epoxy resin for infusion process HP-E30RI

Infusion System - Epoxy Resin | HP-E30RI

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 30 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 61,90 EUR

83 g/m² Peel Ply Plain (Width: 150 cm)...

Weight:	83 g/m²
Weave:	Plain
Width:	150 cm
Material:	Nylon 6.6

3,75 EUR

320 g/m² Glass fabric Bidiagonal | HP-B320E...

Complete rolls of 63,5 m²

Per roll:	63,5 m²
Construction:	Bidiagonal +/-45°
Weight:	320 g/m²
Width:	127 cm

2,09 EUR

Laminating System - Epoxy Resin | HP-E110L...

The Epoxy-System HP-E110L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 110 minutes.

These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.

from 14,90 EUR