Subscribe to Newsletter

 
 
Liquid foaming agent | HP-BEL11
HP-BEL11 a liquid foam blowing agent
Preview: Liquid foaming agent | HP-BEL11
Preview: HP-BEL11 a liquid foam blowing agent
Liquid foaming agent | HP-BEL11
Mobile Preview: Liquid foaming agent | HP-BEL11
Mobile Preview: HP-BEL11 a liquid foam blowing agent

Liquid foaming agent | HP-BEL11

Product No.:
HP-BEL11
ca. 1-3 days ca. 1-3 days (abroad may vary)
from 3,95 EUR

incl. 19% tax excl. Shipping costs

This product is compatible with (for example):

Multi-Purpose System Epoxy HP-E45KL
TOP

The Epoxy-System HP-E45KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with working time (pot life) about 45 minutes. It is versatile for laminating and for bonding / gluing applications.

Bonding, Laminating, Mould Making

from 6,90 EUR
6 x 3 g Glitter Set | GL
  • Suitable for clear epoxy casting resins
  • Colours: red, purple, green, blue, gold, silver
  • Intensive reflection effect
​Glitter decoration sprinkle in useful sprinkle tubes
2,99 EUR
0,17 EUR per g

This product is similar to:

Polyester resin based on ISO NPG -Resin & Hardener- | HP-P21LSP
  • Unsaturated Polyester Resin
  • Orthophtalic-based, pre-accelerated, high thixotropic index
  • Waxed for top or finish uses
  • Good mechanical properties
  • Excellent wet-out of fiberglass, carbon and aramid fibers
  • LSE (Low Styrene Emission) polyester resin
  • Applicable for hand lay-up, spray-up and for general reinforced plastics
  • Contains peroxide-indicatorLimited Shipping 
instead 83,89 EUR
only 75,50 EUR
You save 10%
7,55 EUR per Kg
Mould Release Agent for Epoxy and Polyester
  • Silicon free dispersion of wax in a dissolver mixture
  • Operating temperature up to 80°C
  • Sprayable, contains dissolver for epoxy and polyester resin
  • Suitable for smooth and dense undergrounds and in connection with the Film Release Agent HP-PVA
from 8,90 EUR
High-Gloss Release Agent
  • Water based release agent for applications with In-Mould Coatings (HP-IMC) from HP-Textiles.
  • Also suitable for solvent free epoxy resins, unsaturated polyester resin and vinyl ester resins.
  • Fast drying time (per layer <5 minutes at 20°C)
  • Semipermanent, external release agent with good demoulding features
  • Minimises remains on the moulds’ surface – and at the same time no transmission to the component
from 9,88 EUR

Customers who bought this product bought also the following products:

Epoxy Priming resin HP-E80FS

The Epoxy System E80FS is an unfilled, low-viscosity combination of resin and hardener with high  adhesion to several surfaces.
- Primer, Adhesion Promoter and Corrosion Protection -

 

from 16,90 EUR
Foam Laminating Set | HP-L300
Lenght: 27 cm
Roll width: 10 cm
Paint tray: 300 ml
3,32 EUR