Silicone rubber | HP-SI6GB

The Silicone-Rubber HP-SI6GB is a medium-viscosity combination of resin and hardener with working time (pot life) about 6 minutes.

Mixed viscosity: Medium viscous
Demoldable: 3 h (at 20°C)
Colour (mixed): Lime green

Technical data:

Mixing ratios (by weight):	100 parts resin : 100 parts hardener
Working time (pot life):	6-8 minutes (100 g at 20°C)
Working temperature:	20-23 °C

Areas of application:
Excellent for duplicating from original, application with high dimensional accuracy, creation of flexible moulds, ...

Properties and application notes:

Medium viscous mould making
High tear strength
Working time 6-8 minutes
High fillable casting resin
Smooth cast without air bubbles

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

This product is similar to:

Silicone spray 200 ml | SSP

Versatile, free from grease lubricant
Release agent for GfK and silicone moulds
Care agent for cured silicone moulds
Hand spray can

Colourless lubricant and release agent based on silicone oil. Silicone spray is also used for silicone moulds.

5,95 EUR

Thinner for SI6GB / SI30GB / SI41GB | SI-RV...

Excellent dilution effect
Solvent-free
Dilution of condensation and additioncuring RTV-2 silicone systems
Optimization of the gradient properties
Dosage till 10 %
Quantity: 500 g

19,94 EUR
39,88 EUR per Kg

Customers who bought this product bought also the following products:

Covering System - Topcoat - Epoxy Resin...

This epoxy-system is an transparent, unfilled combination of resin and hardener with short working time and low viscosity.

Topcoat, 25 minutes working time

7,90 EUR
49,38 EUR per Kg

Casting system resin transparent HP-E50GB

Casting System (transparent) - Epoxy Resin...

Transparent, low shrink-casting with tacky-free surfaces
Very good flow behaviour (low-viscosity)
Cold-hardening, demouldable at room-temperature
High fillable casting resin
Cause pressure-resistant and impact-resistant (tough) moulds / components with high strength and very less shrinkage