Subscribe to Newsletter

 
 
Epoxy Adhesive HP-E5K
Adhesive System - Epoxy Resin | HP-E5K
Epoxy Adhesive HP-E5K

Adhesive System - Epoxy Resin | HP-E5K

Product No.:
HP-E5K
Shipping time:
ca. 1-3 days ca. 1-3 days (abroad may vary)
from 9,90 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

Epoxy Adhesive, applicable from 5°C | Epoxy Resin HP-E5K

The Epoxy Adhesive HP-E5K is an unfilled combination of resin and hardener with processing time (pot life) of 5 minutes.


Features & Benefits 

  • Cold-hardening, medium viscous, applicable from 5°C
  • Production of high performance bondings
  • Very good wet-out of substrate surfaces
  • Free of solvents and filling agents, if required fillers can be added (for gap-fillings etc.)
  • Bondings are resistant against oil, grease, moisture, diluted acid or lyes and several solvents
  • They adhere metal, wood, rubber, ceramic, rigid foams and many plastics.
Epoxy adhesives do not give off volatile components and therefore pressure onto the bonding while hardening is not necessary. Extensive bindings and parts that are under tension need as much pressure as there is enough contact between the parts that have to be adhered together. Extensive parts need to be fixed by the pressure.
Technical Data

Product Properties Epoxy System HP-E5K

  • Colouring: slightly yellow / clear
  • Mixing ratio (resin : hardener): 100 : 100
  • Pot life time (at 25°C): 5 minutes
  • Hand-tight: 10 minutes
  • Functional strength (100 g / 23°C): 2 h
  • Processing temperature (minimum): 5°C

Working Notes / Hazard Statements

Working notes and decision guidance for Epoxy Resins

Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.

Practical tips for epoxy resins (PDF)

Epoxy resin for boat building (PDF)

Decision guidance epoxy resins (PDF)
 

Hazard Statements

Resin:
Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Hazard pictograms GHS07Piktogramm-Gefahrenhinweis-Fisch

Hardener:
Danger
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects.
Piktogramm-Gefahrenhinweis-AetzendPiktogramm-Gefahrenhinweis-Achtung

This product is compatible with (for example):

49 g/m² Glass Fabric "Finish" Plain | HP-P49EF
49 g/m² Glass Fabric "Finish" Plain | HP-P49EF...
Weight: 49 g/m²
Weave: Plain
Sizing: Finish
Width: 127 cm
4,19 EUR
Mixing tube HP-L4002
Mixing tube for 29g double syringe (5min...
Length:              85mm (13 mixing stages)
Diameter:           fittable (Ø 1 - 4 mm)
1,89 EUR
Glow in the dark light powder | HP-GLOW
Glow in the dark light powder | HP-GLOW
  • Glow time: up to 10 hours, depending on the amount of light stored or light intensity
  • Ideal for casting applications such as for example River tables, jewelry floor markings, stair edges, emergency exits, varnishes, furniture etc.
  • Compatible with many basic materials 
  • Charging by: UV-radiation, daylight, artificial light and many more
from 9,98 EUR
Spatula Set, plastic | HP-L1103
Spatula Set, plastic | HP-L1103
Material: Plastic
Size: 50/75/100 + 120 mm
Colour: Blue
Content: 4 pcs.
1,11 EUR

This product is similar to:

Levelling additive | HP-BEL71
Levelling additive | HP-BEL71
  • BEL71 is a levelling additive
  • Solution of functional polyacrylates
Stir it preferably into the base resin before adding other components.
It reduces surface defects (“fish-eyes”), especially used in upper layers (topcoats). It is also possible to add the additive to the finished systems.
from 3,95 EUR
340 g/m² Unidirectional-Carbonfabric-Tape (40 mm) | HP-U340C/040
340 g/m² Unidirectional-Carbonfabric-Tape...
Construction: 0°
Fibre: HT-Fibre
Weight: 340 g/m²
Width: 40 mm
3,71 EUR
Carbon Fabric 160 g/m² Twill | HP-T600C
600 g/m² Carbon Fabric Twill | HP-T600C
Weight: 600 g/m²
Weave: Twill 2/2
Width: 100 cm
45,16 EUR
Carbon braided Sleeve 3K (D= 62 mm at 45°) | HP-BSC062/144/3
Carbon braided Sleeve 3K (D= 62 mm at 45°)...
Material: 3K 200tex (HT-Fibre)
Number of ends: 144
Diameter at 45°: 62 mm
Area of applications: 25 - 85 mm

**Offered and sold in stretched condition!**
8,91 EUR

Customers who bought this product bought also the following products:

Epoxy Adhesive HP-E120K
Adhesive System - Epoxy Resin | HP-E120K
The Epoxy Adhesive System HP-E120K is an unfilled, medium-viscosity combination of resin and hardener with medium reaction time.

Processing time of 120 minutes, adhere metal, wood, rubber, ceramic, rigid foams and many plastics
from 10,90 EUR
Silicone spray 200 ml | SSP
Silicone spray 200 ml | SSP
  • Versatile, free from grease lubricant
  • Release agent for GfK and silicone moulds
  • Care agent for cured silicone moulds
  • Hand spray can
Colourless lubricant and release agent based on silicone oil. Silicone spray is also used for silicone moulds.
5,95 EUR
High performance laminating system HP-E29L
High Performance Laminating System - Epoxy...

The Epoxy-System HP-E29L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 25 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E28L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.
from 26,50 EUR
Carbon Fabric 80 g/m² Plain
80 g/m² Carbon Fabric Plain | HP-P80C
Weight: 80 g/m²
Weave: Plain
Width: 100 cm
79,98 EUR