Main page » Reinforcement Fabrics » Carbon Fabric » Twill » 600 g/m² Carbon Fabric Twill | HP-T600C

Preview: Carbon Fabric 160 g/m² Twill | HP-T600C

600 g/m² Carbon Fabric Twill | HP-T600C

Mobile Preview: Carbon Fabric 160 g/m² Twill | HP-T600C

600 g/m² Carbon Fabric Twill | HP-T600C

Product No.:: HP-T600C
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-2,5 m²: per 45,16 EUR
3-4,5 m²: per 42,78 EUR
5-9,5 m²: per 40,40 EUR
10-24,5 m²: per 38,02 EUR
25-49,5 m²: per 35,64 EUR
50-99,5 m²: per 33,26 EUR
> 99,5 m²: per 32,37 EUR

45,16 EUR

incl. 19% tax excl. Shipping costs

Description

Carbon Fiber Fabric Twill | HP-T600C

Weight: 600 g/m²
Weave: Twill 2/2
Width: 100 cm

Yarn type specifications:
Warp: 3,7 y/cm (12K 800Tex)

Weft: 3,7 y/cm (12K 800Tex)

Thickness: 0,85 mm

Areas of application:

Ship and boat construction, motor sport, aircraft construction, ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 720 g/m²
Laminate thickness: 0,96 mm
Laminate weight: 1320 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

** The length of the rolls may vary. Therefore it is possible that a position of 10m² or more consists of several rolls. **

Working Notes & Support

Working Notes:
In this instruction you will tips & tricks to produce carbon-design parts:
Carbon Coating (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Carbon Fabric Constructions:

Carbon Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of carbon fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

600 g/m² Bidiagonal Carbonfabric | HP-B600C...

Construction:	+/-45°
Fibre:	HT-Fibre
Weight:	600 g/m²
Width:	127 cm

32,80 EUR

Epoxy resin multi-purpose system 25 min...

Multi purpose system
Unfilled, low viscous 2-components combination of resin and hardener
Working time approx. 25 minutes
Applicable from 5°C temperature

Resin for laminate, top coat, adhesives, spatula and mould making.

from 10,90 EUR

Adhesive System - Epoxy Resin | HP-E5K

The Epoxy Adhesive System HP-E5K is an unfilled, medium-viscosity combination of resin and hardener with fast reaction time.

Processing time of 5 minutes, applicable from 5°C

from 9,90 EUR

Thixotropypowder | HP-PK22

Is applied as a thickening and thixotropic agent in many organic systems
Amorphous pyrogenic silica
White colloidal powder of high purity

from 5,59 EUR

Foam Laminating Set | HP-L300

Lenght:	27 cm
Roll width:	10 cm
Paint tray:	300 ml

3,32 EUR

This product is similar to:

600 g/m² Quadraxial Carbonfabric | HP-Q600C...

Construction:	0°/-45°/90°/+45°
Fibre:	HT-Fibre
Weight:	600 g/m²
Width:	127 cm

36,65 EUR

525 g/m² Unidirectional-Carbonfabric-Tape...

Construction:	0°
Fibre:	HT-Fibre
Weight:	525 g/m²
Width:	50 mm

5,30 EUR

525 g/m² Unidirectional-Carbonfabric-Tape...

Construction:	0°
Fibre:	HT-Fibre
Weight:	525 g/m²
Width:	100 mm

9,07 EUR

500 g/m² Unidirectional Carbonfabric | HP-U500/123C...

Construction:	0°
Fibre:	HT-Fibre
Weight:	500 g/m²
Width:	123 cm

28,20 EUR

Customers who bought this product bought also the following products:

Radius roller | HP-RR

Aluminium radius roller are used for compressing and ventin the laminates with screw fastening incl. holder and plastic grip.

Suitable for glass fabrics

Available dimensions:
Item-No.:	Diameter:	Width:
HP-RR-13x75	13 mm	75 mm
HP-RR-25x75	25 mm	75 mm
HP-RR-25x150	25 mm	150 mm
HP-RR-50x75	50 mm	75 mm
HP-RR-50x150	50 mm	150 mm

from 9,90 EUR

500 ml Plastic cup (3 pc.) | HP-L1064-3

Material:	PP-Natur, round
Volume:	500 ml
Quantity/Package:	3 pieces per package

1,20 EUR
0,40 EUR per cup

Scissors "OPTIMA" | HP-L1054

Lenght:	28 cm
Blade lenght:	12 cm
Colour:	blue

7,45 EUR

infusionsystem resin and hardener HP-E200GL

Infusion System -Epoxy Resin | HP-E200GL

The hardener HP-E200GL allows a pot-life of 200 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E120RI, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

from 5,90 EUR