Main page » Reinforcement Fabrics » Glass Filament Fabric Silane » Plain » 86 g/m² Glass Fabric "Silane" Plain | HP-P80E

86 g/m² Glass Fabric "Silane" Plain | HP-P80E

Name: 86 g/m² Glass Fabric "Silane" Plain | HP-P80E
SKU: HP-P80E
Price: 5.65 EUR
Availability: InStock

Product No.:: HP-P80E
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-4,9 m²: per 5,65 EUR
5-9,9 m²: per 5,27 EUR
10-24,9 m²: per 4,90 EUR
25-49,9 m²: per 4,14 EUR
50-99,9 m²: per 3,20 EUR
> 99,9 m²: per 2,73 EUR

5,65 EUR

incl. 19% tax excl. Shipping costs

m²:

Add to wish list

Ask about product

Description

Glass Fiber Fabric Silane Plain | HP-P80E

Weight: 86 g/m²
Weave: Plain
Sizing: Silane
Width: 100 cm

Yarn type specifications:
Warp: 12 y/cm (EC9-34 tex)

Weft: 11,5 y/cm (EC9-34 tex)

Areas of application:

Sandwich components, design of models, thin coating, boat building, ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 71 g/m²
Laminate thickness: 0,09 mm
Laminate weight: 157 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Delivery notes for this product:
Delivery up to 2,5 m² only folded up. More than 3 m² only on roll.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks by working with glass fiber fabrics and epoxy resins:
Boat Building (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Glass Fabric Constructions:

Glass Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of Glass fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

160 g/m² Glass fabric Bidiagonal | HP-B160E...

Construction:	+/-45°
Weight:	160 g/m²
Width:	127 cm

4,71 EUR

Adhesive System - Epoxy Resin | HP-E5K

The Epoxy Adhesive System HP-E5K is an unfilled, medium-viscosity combination of resin and hardener with fast reaction time.

Processing time of 5 minutes, applicable from 5°C

from 9,90 EUR

Laminating System - Epoxy Resin | HP-E55L...

The Epoxy-System HP-E55L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 55 minutes.

These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.

from 5,50 EUR

Casting system resin transparent HP-E50GB

Casting System (transparent) - Epoxy Resin...

Transparent, low shrink-casting with tacky-free surfaces
Very good flow behaviour (low-viscosity)
Cold-hardening, demouldable at room-temperature
High fillable casting resin
Cause pressure-resistant and impact-resistant (tough) moulds / components with high strength and very less shrinkage

from 5,50 EUR

This product is similar to:

50 g/m² C-Glass Non Woven | HP-VJ50C

Weight:	50 g/m²
Construction:	Non woven
Width:	100 cm

2,14 EUR

80 g/m² Glass fabric tape Plain | HP-P80/080E

80 g/m² Glass fabric tape Plain (Width: 8...

Construction:	Plain
Weight:	80 g/m²
Width:	8 cm
roll length:	200 m

0,58 EUR

Epoxy Resin multi-purpose system 45 min...

The Epoxy-System HP-E45KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with working time (pot life) about 45 minutes. It is versatile for laminating and for bonding / gluing applications.

Bonding, Laminating, Mould Making

from 6,90 EUR

Customers who bought this product bought also the following products:

100g/m² Bidiagonal carbon fabric with black...

Construction:	+/-45°
Fibre:	Toray
Weight:	100 g/m²
Width:	127 cm

27,97 EUR

150 g/m² Non-woven absorber | HP-VP150P

Material:	100% polyester (white)
Weight:	150 g/m²
Width:	130 cm

3,75 EUR

High Performance Laminating Resin Epoxy HP-E56L

High Performance Laminating System - Epoxy...

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E55L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

from 5,50 EUR

50 g/m² Vacuum Bagging Film Tube | HP-VFT50/090...

Material:	PA
Diameter:	57 cm
Weight:	50 g/m²
Width:	90 cm

3,80 EUR