Main page » Vacuum Technology » Peelply » Plain » 83 g/m² Peel Ply Plain (Width: 150 cm) | HP-P83P150

83 g/m² Peel Ply Plain (Width: 150 cm) | HP-P83P150

Product No.:: HP-P83P150
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

on request

Ask about product

Description

83 g/m² Peel Ply Plain (Width: 150 cm) | HP-P83P150

It is made of Nylon and is added into epoxy- or polyester resins as the first and/or last layer of the construction. After hardening, just before further processing it has to be peeled of slowly and in a sharp angle. The Peel Ply leaves an evenly rough, lubricant film free and adhesive surface behind. Sanding or cleaning of the surface is not necessary before sticking or coating. The Peel Ply can´t remain in the construction therefore is a red or blue tracer thread woven into the fabric.

Weight: 83 g/m²
Weave: Plain
Width: 150 cm
Material: Nylon 6.6 cleaned

Yarn type specifications:
Warp: 19 y/cm

Weft: 16 y/cm

Advantages of Peel Ply Fabric:

Accurate upper surface
A bit rough after tearing off, absolutely clean and free of dust
Ideal subsoil for bonding or further laminating/painting
Saves time, no need to grind with sand-paper or removing of grinding dust

In some cases it is desired to have a slip resistance of the component (e.g. stand space of surf boards, boat decks). The surface is after tearing the Peel Ply off ready for use.

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Delivery notes for this product:
Delivery up to 4,9 m² only folded up. More than 5 m² only on roll.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks by working with reinforcement fabrics:
Boat Building (PDF)

further working notes you will find here

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Peel Ply Constructions:

Peel Ply are available in plain or twill. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of peel ply:
Product information for safe handling (PDF)

This product is compatible with (for example):

Connector 12/12 mm | HP-VZ1060

Push-in connector for easy connection
Both sides of the same diameter
For tubes with a outside-diameter of 12 mm

4,51 EUR

Vacuum Bagging Film (Width: 150 cm) | HP-VFT70-150

70 g/m² Vacuum Bagging Film Tube | HP-VFT70/150...

Material:	PE / PA / PE
Weight:	70 g/m²
Width:	150 cm
Colour:	transparent

2,92 EUR

44 g/m² Perforated Release Film | HP-RF44/156...

Material:	HDPE
Weight:	44 g/m²
Width:	156 cm
Colour:	Blue, transparent

3,27 EUR

Digital Table Scale 10Kg/1g with LCD Display...

Strain Gauge Precision Technology
Capacity: up to 10kg
Readability: 1g
Display Modes: g / kg / oz / lb / tl
Key with Full Function: ON/OFF/TARA/ZERO
Auto/Manual Shut-Off
Powered by Battery (included) or Power Adapter

39,90 EUR

Adhesive System - Epoxy Resin | HP-E5K

The Epoxy Adhesive System HP-E5K is an unfilled, medium-viscosity combination of resin and hardener with fast reaction time.

Processing time of 5 minutes, applicable from 5°C

from 9,90 EUR

This product is similar to:

PE hose for vacuum moulding standard | HP-VZ1010...

The PE-Hose is used in the vacuum-injection (vacuum-infusion) process. It can be used mainly as a disposable product in combination with our connectors POM.