Subscribe to Newsletter

 
 
150 g/m² Non-woven for mould construction | HP-VP151P
150 g/m² Non-woven for mould construction | HP-VP151P
Preview: 150 g/m² Non-woven for mould construction | HP-VP151P
Preview: 150 g/m² Non-woven for mould construction | HP-VP151P
150 g/m² Non-woven for mould construction | HP-VP151P
150 g/m² Non-woven for mould construction | HP-VP151P
150 g/m² Non-woven for mould construction | HP-VP151P
Mobile Preview: 150 g/m² Non-woven for mould construction | HP-VP151P
Mobile Preview: 150 g/m² Non-woven for mould construction | HP-VP151P

150 g/m² Non-woven for mould construction | HP-VP151P

Product No.:
HP-VP151P
ca. 1-3 days ca. 1-3 days  (abroad may vary)
Sliding scale prices
1-4,5 m²
per 3,75 EUR
5-9,5 m²
per 2,68 EUR
10-24,5 m²
per 2,14 EUR
25-64,5 m²
per 1,61 EUR
> 64,5 m²
per 1,34 EUR
3,75 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

150 g/m² Non-woven for mould construction | HP-VP151P

Weight: 150 g/m²
Width: 130 cm
 
Fibre orientation:
Material: 100 % polyester
Thickness: approx. 3 - 4 mm
Weave: Needled
 
Technical Data Sheet Carbon Fabric HP-P200C
Areas of application: 
Car boot expansion, car- hi-fi extensions and door boards, roof liners, ...

► Laminate calculator
Here you can calculate specific values for your application.
Working Notes & Support
Working Notes:
In this instruction you will find tips & tricks for epoxy resins and fabrics in boatbuilding:
Boatbuilding (PDF)

further working notes you will find here


Decision guidance for Epoxy Resins:
Overview Epoxy Resins (PDF)


Working Notes:
Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Customers who bought this product bought also the following products:

Primer, undercoating, adhesion agent for epoxy resins
Primer - adhesion agent for epoxy resins...
  • PUR primer for sticking or laminating on smooth surfaces
  • High adhesion, suitable for all epoxy resins from HP-Textiles
  • Ground coat (primer for carbon design)
  • For spraying, manual application with paint-brush or roller is also possible
  • Wax free, without styrene
18,90 EUR
Mould Covering Epoxy Resin HP-E30FB
Mould Covering System, black - Epoxy Resin...
The Epoxy Resin System HP-E30FB is an aluminium-filled, high-viscosity combination of resin and hardener with high hardness.

Mould covering system, 30 minutes working time
28,90 EUR
26,27 EUR per Kg
High Performance Laminating System - Epoxy Resin | HP-E111L
High Performance Laminating System - Epoxy...
The Epoxy-System HP-E111L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 110 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.
26,50 EUR
18,93 EUR per Kg
High-Gloss Release Agent
High-Gloss Release Agent | HP-HGR5
  • Water based release agent for applications with In-Mould Coatings (HP-IMC) from HP-Textiles.
  • Also suitable for solvent free epoxy resins, unsaturated polyester resin and vinyl ester resins.
  • Fast drying time (per layer <5 minutes at 20°C)
  • Semipermanent, external release agent with good demoulding features
  • Minimises remains on the moulds’ surface – and at the same time no transmission to the component
7,50 EUR
75,00 EUR per Liter