Silicone rubber | HP-SI30GB
Silicone rubber | HP-SI30GB
Silicone rubber | HP-SI30GB

Silicone rubber | HP-SI30GB

Product No.:
HP-SI30GB-0.5
ca. 1-3 days ca. 1-3 days  (abroad may vary)
20,90 EUR
41,80 EUR per Kg

incl. 19% tax excl. Shipping costs

Package:
Add to wish list
Ask about product
Description

Silicone rubber | HP-SI30GB

The Silicone-Rubber HP-SI30GB is a medium-viscosity combination of resin and hardener with working time (pot life) about 30 minutes.
 
Mixed viscosity: Medium viscous
Demoldable: 5 h (at 20°C)
Working temperature: 20-23 °C

Technical data:
Mixing ratios (by weight): 100 parts resin : 100 parts hardener
Working time (pot life):   30 minutes (100 g at 20°C)
Colour (mixed):               Red
 
Technical Data Sheet Silicone rubber HP-SI30GB
Areas of applications:
Excellent for duplicating from original, application with high dimensional accuracy, creation of flexible moulds, ...

Properties and application notes:
  • Medium viscous mould making
  • High tear strength
  • Working time 30 minutes
  • High fillable casting resin
  • Smooth cast without air bubble

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

This product is similar to:

Thixotropic for silicone SI30GB | SI-VD
Thixotropic for silicone SI30GB | SI-VD
  • Excellent thickening effect for SI30GB
  • Solvent-free
  • Dilution of condensation and additioncuring RTV-2 silicone systems
  • Optimization of the gradient properties
14,90 EUR
149,00 EUR per Kg
Silicone spray 200 ml | SSP
Silicone spray 200 ml | SSP
  • Versatile, free from grease lubricant
  • Release agent for GfK and silicone moulds
  • Care agent for cured silicone moulds
  • Hand spray can
Colourless lubricant and release agent based on silicone oil. Silicone spray is also used for silicone moulds.
5,95 EUR
Thinner for SI6GB / SI30GB / SI41GB | SI-RV
Thinner for SI6GB / SI30GB / SI41GB | SI-RV...
  • Excellent dilution effect
  • Solvent-free
  • Dilution of condensation and additioncuring RTV-2 silicone systems
  • Optimization of the gradient properties
  • Dosage till 10 %
  • Quantity: 500 g
19,94 EUR
39,88 EUR per Kg

Customers who bought this product bought also the following products:

Aquarium & Humid Terrarium - medium viscosity - Epoxy Resin | HP-E45TM
Aquarium & Humid Terrarium - medium viscosity...

Our Epoxy Resin System E45TM has a medium viscosity and is specially designed for the use in aquariums and terrariums.

Medium viscosity for smooth or non-porous subsoil (Styrofoam, ...)

13,90 EUR
34,75 EUR per
Resin feed line Blade Runner® HP-VZ1475
Resin feed line Blade Runner® HP-VZ1475

Advantages

  • Easy handling
  • No print
  • Minimize air impacts
  • Less void
  • Save working hours and costs
39,51 EUR
Vacuum Flat Channel, 50 mm | HP-VZ1520
Vacuum Flat Channel, 50 mm | HP-VZ1520
Flat channel for vacuum infusion. It consists of a three-dimensional polyester filament core structure wrapped in a non-woven polyester. Very flexible and easy to cut to the appropriate size.

Advantages:
  • No print on the laminate
  • Excellent resin flow
  • Easy application and easy cut
1,70 EUR
Tube clip Squeezee® HP-VZ1400
Tube clip Squeezee® HP-VZ1400

The tube clip Squeezee® allows an exact dosing of the resin flow and easy disconnecting of the resin line in the vacuum infusion.

· Ideal for disconnecting all tube lines
· Exact dosing of the resin flow is possible
· Suitable for tubes up to 15 mm outer diameter
· very easy to handle

32,90 EUR