Complete-Set for moulding
With this set you are able to create or remode positive or negative forms. The materials are sufficient for small to medium work.
Moulding with epoxy resin
Mold construction with epoxy resin has the advantage of lower shrinkage and higher stability.
In contrast to the polyester resin, it is also almost odorless.
Mold construction can be divided into two different versions:
The negative form for smooth outer surfaces, especially visible parts in model making.
The positive-form for smooth inner surfaces, for example pool construction.
The set consist of the following products:
| 1100g | Epoxy mould resin - HP-E30FB |
| 800g | Epoxy laminating resin - HP-E45KL |
| 1m² | Glass fabric approx.105g/m² Twill 2/2 |
| 2m² | Glass fabric with 320g/m² +/- 45° |
| 200ml | Priming wax |
| 200ml | Film release agent PVA |
| 100g | Cotton flocks |
| 100g | Chopped glass fibre |
| 1 x | 10pcs. lacquerded set - HP-L1001 |
| 5 Pair | Nitrile gloves size XL |
| 5 x | Mixing cups (plastic) |
| 5 x | Wood sticks for mixing |
Arbeitsanleitung - Formenbau 
1. DER HINTERGRUND
… Die Formen
… Das Urmodell
… Die Trennschicht
2. DIE AUSWAHL DER FORMENBAUHARZE
3. DER AUFBAU DER FORMENDECKSCHICHT
… schnelle Lösung ohne Kupplungsschicht
… zeitlich versetztes Arbeiten MIT Kupplungsschicht
4. DIE VERSTÄRKUNGSLAGEN
… Die Ecken / Kanten
… Aufbau der Verstärkungslagen für den Hinterbau der Form
If you have any further questions, do not hesitate to contact us.
E-Mail.: info@hp-textiles.com or Phone: +49 5905-9459870
