Main page » Reinforcement Fabrics » Aramid Fabric » 170 g/m² Aramid Fabric Plain | HP-P170A

Preview: Aramid Fabric 170 g/m² Plain - P170A

170 g/m² Aramid Fabric Plain | HP-P170A

Mobile Preview: Aramid Fabric 170 g/m² Plain - P170A

170 g/m² Aramid Fabric Plain | HP-P170A

Product No.:: HP-P170A
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: 502 m²

Sliding scale prices

1-2,5 m²: per 24,95 EUR
3-4,5 m²: per 22,97 EUR
5-9,5 m²: per 20,90 EUR
10-24,5 m²: per 18,98 EUR
25-49,5 m²: per 17,55 EUR
50-119,5 m²: per 15,95 EUR
> 119,5 m²: per 15,51 EUR

24,95 EUR

incl. 19% tax excl. Shipping costs

Description

Aramid Fiber Fabric Plain | HP-P170A

Weight: 170 g/m²
Weave: Plain
Width: 120 cm

Yarn type specifications:
Warp: 5,2 y/cm (158 tex)

Weft: 5,2 y/cm (158 tex)

** The length of the rolls may vary. Therefore it is possible that a position from 10m² consists of several rolls. **

Areas of application:

Ship and boat construction, modelling, aircraft construction, sports equipment making, motor sport, ...

Properties Aramid Fiber:
Aramid fibres are characterized by a high tenacity, a very good impact strength and abrasion resistance. Further properties are e.g. a good dampening ability, excellent chemical resistance and non-flammability.

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 240 g/m²
Laminate thickness: 0,335 mm
Laminate weight: 410 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Working Notes & Support

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Aramid Fabric Constructions:

Aramid Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of aramid fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

High Performance Laminating System - Epoxy...

The Epoxy-System HP-E111L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 110 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E110L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

from 26,50 EUR

28 cm plastic Stirrer | HP-L1128

Colour:	Black
Material:	Plastic
Size:	28 cm incl hole and retaining hooks

0,95 EUR

Scissors "OPTIMA" | HP-L1054

Lenght:	28 cm
Blade lenght:	12 cm
Colour:	blue

7,45 EUR

Covering System - Topcoat - Epoxy Resin...

This epoxy-system is an transparent, unfilled combination of resin and hardener with medium working time and low viscosity.

Topcoat, High UV-stability, 40 minutes working time

from 5,50 EUR

Sealant Tape | HP-ST12X3/80

Material:	Butyl Rubber
Width:	12 mm
Thickness:	3 mm
Length:	15 mtr.

10,41 EUR

This product is similar to:

170 g/m² Aramidfabric-Tape Plain (Widht: 10 cm) | HP-P171A/100

170 g/m² Aramidfabric-Tape Plain (Width:...

Weight:	170 g/m²
Weave:	Plain
Width:	10 cm

6,07 EUR

Laminating System - Epoxy Resin | HP-E110L...

The Epoxy-System HP-E110L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 110 minutes.

These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.

from 14,90 EUR

Complete-Set for moulding | HP-KS-FB

With this set you are able to create or remode positive
or negative forms. The materials are sufficient for small
to medium work.

87,50 EUR

Thinner for Epoxy Resins | HP-XB

The Thinner XB is a xylene / butanol based dissolver with high dissolving power.

Degreasing agent for cleaning applications / passive thinning agent for EP-Systems

from 11,50 EUR

Customers who bought this product bought also the following products:

High Performance Laminating System - Epoxy...

from 26,50 EUR

High Performance Laminating Resin Epoxy HP-E56L

High Performance Laminating System - Epoxy...

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E55L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

from 5,50 EUR

5 cm Velour Roller | HP-L1067

Width:	5 cm
Pile hight:	5 mm

0,82 EUR

Chopped Glass Fibres 3 mm | HP-GS3

For an increased tensile, compressive and flexural strength
Mixture remains flowable
For moulding material
Reinforcement of gluing spots / adhesive beading
In combination with cotton flocks (HP-BF1) suitable for coupling layers in mould making

from 2,59 EUR