Main page » Reinforcement Fabrics » Carbon Fabric » Plain » 160 g/m² Spread Tow Carbon Fabric Plain | HP-P161SC

Preview: 160 g/m² Spread Tow Carbon Fabric Plain - 3K-Fibre | HP-P161SC

160 g/m² Spread Tow Carbon Fabric Plain | HP-P161SC

Mobile Preview: 160 g/m² Spread Tow Carbon Fabric Plain - 3K-Fibre | HP-P161SC

160 g/m² Spread Tow Carbon Fabric Plain | HP-P161SC

Product No.:: HP-P161SC
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-2,5 m²: per 38,95 EUR
3-4,5 m²: per 36,75 EUR
5-9,5 m²: per 33,92 EUR
10-24,5 m²: per 32,84 EUR
25-49,5 m²: per 29,98 EUR
50-130,5 m²: per 27,97 EUR
> 130,5 m²: per 25,99 EUR

38,95 EUR

incl. 19% tax excl. Shipping costs

Description

160 g/m² Spread Tow Carbon Fabric Plain | HP-P161SC

This Spread-Two-Carbon-Fabric is a fabric with a standard 3K spreaded fibres. It is very thin through the spreading of the single filaments but nevertheless is the fabric very closed. You achieve an increased strength and a lower resin consumption because of the low fibre bending. It is ideal for design applications because of its’ unique carbon look.

Construction: Plain

Weight: 160 g/m²

Width: 125 cm
Fibre: Spread Tow / approx 2,5 mm strand width

Fibre orientation:

Warp:	4 y./cm (3K 200 Tex / HT-Fibre)
Weft:	4 y./cm (3K 200 Tex / HT-Fibre)
Thickness:	0,27 mm

Areas of application:

Design application, modelling, sports equipment, carbon design, motor sport, ...

► Laminate calculator
Here you can calculate specific values for your application.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks to produce carbon-design parts:
Carbon Coating (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Carbon Fabric Constructions:

Carbon Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of carbon fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

150g/m² Bidiagonal carbon fabric with black...

Construction:	+/-45°
Fibre:	Mitsubishi Grafil
Weight:	150 g/m²
Width:	127 cm

23,15 EUR

Liquid foaming agent | HP-BEL11

BEL11 Liquid foaming agent
Solution of functional carbonyl diamides
Usable with: epoxy

To foam up of epoxy resins and to build foam laminates or in combination with sandwich materials (such as paddles or other components).

from 3,95 EUR

Glow in the dark light powder | HP-GLOW

Glow time: up to 10 hours, depending on the amount of light stored or light intensity
Ideal for casting applications such as for example River tables, jewelry floor markings, stair edges, emergency exits, varnishes, furniture etc.
Compatible with many basic materials
Charging by: UV-radiation, daylight, artificial light and many more

from 9,98 EUR

20 cm plastic Stirrer | HP-L1120

Colour:	Red
Material:	Plastic
Size:	20 cm incl hole and retaining hooks

0,83 EUR

Pigment paste opaque | FPN

Liquid Pigment pastes for colouring
Due to a high pigment concentration very efficient in consumption
Good colouring
Suitable for solvent free for epoxy resin and polyurethane systems

from 3,29 EUR

This product is similar to:

165g/m² Hybrid Fabric Plain - Carbon/Kevlar...

Weight:	165 g/m²
Weave:	Plain
Width:	100 cm
Warp:	5 y./cm (158 Tex Aramid)
Weft:	4 y./cm (200 Tex 3K Carbon)

*Please enter below the desired quantity in m²

25,99 EUR

Customers who bought this product bought also the following products:

Infusion System - Epoxy Resin | HP-E120RI...

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 200 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 58,90 EUR