Main page » Reinforcement Fabrics » Carbon Fabric » Twill » 600 g/m² Carbon Fabric Twill | HP-T600/125C

Preview: Carbon Fabric 600 g/m² Twill | HP-T600C

600 g/m² Carbon Fabric Twill | HP-T600/125C

Mobile Preview: Carbon Fabric 600 g/m² Twill | HP-T600C

600 g/m² Carbon Fabric Twill | HP-T600/125C

Product No.:: HP-T600/125C
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-2,5 m²: per 38,95 EUR
3-4,5 m²: per 36,59 EUR
5-9,5 m²: per 34,39 EUR
10-24,5 m²: per 31,99 EUR
25-49,5 m²: per 29,95 EUR
50-99,5 m²: per 28,50 EUR
> 99,5 m²: per 27,31 EUR

38,95 EUR

incl. 19% tax excl. Shipping costs

Description

Carbon Fiber Fabric Twill | HP-T600/125C

Weight: 600 g/m²
Weave: Twill 2/2
Width: 125 cm

Yarn type specifications:
Warp: 3,7 y/cm (12K Hyosung Tansome H2550 800Tex)

Weft: 3,7 y/cm (12K Hyosung Tansome H2550 800Tex)

Thickness: 0,85 mm

Areas of application:

Ship and boat construction, motor sport, aircraft construction, ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 720 g/m²
Laminate thickness: 0,96 mm
Laminate weight: 1320 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Delivery notes for this product:
** The length of the rolls may vary. Therefore it is possible that a position of 10m² consists of several rolls. **

Working Notes & Support

Working Notes:
In this instruction you will tips & tricks to produce carbon-design parts:
Carbon Coating (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Carbon Fabric Constructions:

Carbon Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

This product is compatible with (for example):

600 g/m² Quadraxial Carbonfabric | HP-Q600C...

Construction:	0°/-45°/90°/+45°
Fibre:	HT-Fibre
Weight:	600 g/m²
Width:	127 cm

33,92 EUR

15 mm Laminating brush | HP-L1107

Width:	15 mm
Bristle:	Black China bristle
Stalk:	Wood stalk

0,85 EUR

Glow in the dark light powder | HP-GLOW

Glow time: up to 10 hours, depending on the amount of light stored or light intensity
Ideal for casting applications such as for example River tables, jewelry floor markings, stair edges, emergency exits, varnishes, furniture etc.
Compatible with many basic materials
Charging by: UV-radiation, daylight, artificial light and many more

from 9,98 EUR

Reactive diluent for Epoxy Resins | RV23

Consider RV23 in the calculation of the hardener quantity!
Dosage up to 20 %
For a lower brittleness, we recommend adding 5 %
Overdose leads to losses of heat resistance and tensile strength

The reactive thinner RV23 is a low viscous, difunctional additive for epoxy resin systems.

from 23,90 EUR

8 mm Handle for paint rollers | HP-L1023

Diameter:	8 mm
Material strap:	Round steel
Material handle:	Plastic

2,24 EUR

This product is similar to:

600 g/m² Bidiagonal Carbonfabric | HP-B600C...

Construction:	+/-45°
Fibre:	HT-Fibre
Weight:	600 g/m²
Width:	127 cm

32,80 EUR

Customers who bought this product bought also the following products:

High-Gloss Release Agent | HP-HGR5

Water based release agent for applications with In-Mould Coatings (HP-IMC) from HP-Textiles.
Also suitable for solvent free epoxy resins, unsaturated polyester resin and vinyl ester resins.
Fast drying time (per layer <5 minutes at 20°C)
Semipermanent, external release agent with good demoulding features
Minimises remains on the moulds’ surface – and at the same time no transmission to the component

from 9,88 EUR

infusionsystem resin and hardener HP-E200GL

Infusion System -Epoxy Resin | HP-E200GL

The hardener HP-E200GL allows a pot-life of 200 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection

from 5,90 EUR