Main page » Reinforcement Fabrics » Glass Filament Fabric Silane » Twill » 105 g/m² Glass Fabric "Silane" Twill | HP-T110E

105 g/m² Glass Fabric "Silane" Twill | HP-T110E

Name: 105 g/m² Glass Fabric "Silane" Twill | HP-T110E
SKU: HP-T110E
Price: 6.65 EUR
Availability: InStock

Product No.:: HP-T110E
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-4,9 m²: per 6,65 EUR
5-9,9 m²: per 6,21 EUR
10-24,9 m²: per 5,77 EUR
25-49,9 m²: per 4,88 EUR
50-99,9 m²: per 3,77 EUR
> 99,9 m²: per 3,22 EUR

6,65 EUR

incl. 19% tax excl. Shipping costs

m²:

Add to wish list

Ask about product

Description

Glass Fiber Fabric Silane Twill | HP-T110E

Weight: 105 g/m²
Weave: Twill 2/2
Sizing: Silane
Width: 100 cm

Yarn type specifications:
Warp: 16 y/cm (EC9-34 tex)

Weft: 15 y/cm (EC9-34 tex)

Areas of application:

Sandwich components, design of models, thin coating, boat building, ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 86 g/m²
Laminate thickness: 0,12 mm
Laminate weight: 191 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Delivery notes for this product:
Delivery up to 2,5 m² only folded up. More than 3 m² only on roll.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks by working with glass fiber fabrics and epoxy resins:
Boat Building (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Glass Fabric Constructions:

Glass Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of glass fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

160 g/m² Glass fabric Bidiagonal | HP-B160E...

Construction:	+/-45°
Weight:	160 g/m²
Width:	127 cm

4,71 EUR

Glow in the dark light powder | HP-GLOW

Glow time: up to 10 hours, depending on the amount of light stored or light intensity
Ideal for casting applications such as for example River tables, jewelry floor markings, stair edges, emergency exits, varnishes, furniture etc.
Compatible with many basic materials
Charging by: UV-radiation, daylight, artificial light and many more

from 9,98 EUR

15 mm Laminating brush | HP-L1107

Width:	15 mm
Bristle:	Black China bristle
Stalk:	Wood stalk

0,85 EUR

Mould Covering System, blue-grey - Epoxy...

High-quality mould covering resin
Non-drip, without run-off on vertical surfaces -high thixotropic, blue-grey coloured
Vacuum degassed
User friendly mixing ratios (100:10)
For abrasion-and breaking resistance surfaces with good thermal conductivity.
Innovative formulation, free of DETA1 with high styrene resistance.

from 29,90 EUR

Epoxy Resin multi-purpose system 45 min...

The Epoxy-System HP-E45KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with working time (pot life) about 45 minutes. It is versatile for laminating and for bonding / gluing applications.

Bonding, Laminating, Mould Making

from 6,90 EUR

Customers who bought this product bought also the following products:

Covering System - Topcoat - Epoxy Resin...

This epoxy-system is an transparent, unfilled combination of resin and hardener with short working time and low viscosity.

Topcoat, 25 minutes working time

from 7,90 EUR

Covering Colour Pigments | FD

The opaque colour pigments of the HP-FD series are used for colouring layers (gel and topcoats). They are suitable for laminating and casting resins.

Suitable for unsaturated polyester resins, epoxy resins, vinylester, polyurethan.

from 2,90 EUR

Epoxy resin for infusion process HP-E30RI

Infusion System - Epoxy Resin | HP-E30RI

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 30 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 61,90 EUR

PU hose for vacuum moulding flexible | HP-VZ1040...

PU hose with high wall thickness and excellent flexibility. Use as resin-carrying line as well as reusable suctionin combination with the vacuum pump HP-VZ1200. Multiple use in combination with our connectors IQS standard.

Available dimensions:
Material:	PU
Außen- Ø :	12 mm
Innen- Ø :	8 mm

3,55 EUR