Mould Covering System, blue-grey - Epoxy Resin | HP-E30FB
Mould covering, blue-grey coloured, thixotropic | Epoxy Resin HP-E30FB
The Epoxy Resin System HP-E30FB is an aluminium-filled, high-viscosity combination of resin and hardener with high hardness and working time (pot life) about 30 minutes.
Technical data:
| Colouring: | Blue-grey, similar RAL 7031 |
| Mixed Viscosity: | High viscous (details table below) |
| Working Time (pot life): | 30 minutes (at 20°C or 68°F) |
| Demouldable after: | 24 h (at 20°C or 68°F) |
| Full Cure: | 7 days (at 20°C or 68°F) |
Areas of application:
Excellent for duplicating from original, application with high dimensional accuracy, creation of high strength moulds, ...
Properties and application notes:
- High-quality mould covering resin
- Non-drip, without run-off on vertical surfaces -high thixotropic, blue-grey coloured
- Vacuum degassed
- User friendly mixing ratios (100:10)
- For abrasion-and breaking resistance surfaces with good thermal conductivity.
- Innovative formulation, free of DETA1 with high styrene resistance.
► Laminate calculator
Here you can calculate specific values for the vacuum infusion.
Working notes and decision guidance for Epoxy Resins
Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.Practical tips for epoxy resins (PDF)
Epoxy resin for boat building (PDF)
Decision guidance epoxy resins (PDF)
Hazard Statements
Resin:
Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Hardener:
Danger
H302+H332 Harmful if swallowed or if inhaled.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H361fd Suspected of damaging fertility. Suspected of damaging the unborn child.
H373 May cause damage to organs through prolonged or repeated exposure.
.jpg "Preview: 200 g/m² Carbon Fabric Plain | HP-P200C")
