Main page » Reinforcement Fabrics » Glass Filament Fabric Finish » Twill » 163 g/m² Glass Fabric "Finish" Twill | HP-T163EF

Preview: Glass Fabric "Finish" Twill | HP-T163EF

163 g/m² Glass Fabric "Finish" Twill | HP-T163EF

Mobile Preview: Glass Fabric "Finish" Twill | HP-T163EF

163 g/m² Glass Fabric "Finish" Twill | HP-T163EF

Product No.:: HP-T163EF
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-2,9 m²: per 6,55 EUR
3-4,9 m²: per 6,28 EUR
5-9,9 m²: per 6,02 EUR
10-24,9 m²: per 5,50 EUR
25-49,9 m²: per 4,97 EUR
50-99,9 m²: per 4,45 EUR
> 99,9 m²: per 3,80 EUR

6,55 EUR

incl. 19% tax excl. Shipping costs

Description

Glass Fiber Fabric Finish Twill | HP-T163EF

Weight: 163 g/m²
Weave: Twill 2/2
Sizing: Finish
Width: 100 cm

Yarn type specifications:
Warp: 12 y/cm (EC9-68 tex)

Weft: 11,5 y/cm (EC9-68 tex)

Areas of application:

Design of models-, sport equipment, boat-, tank- and mould construction, car-parts, ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 136 g/m²
Laminate thickness: 0,18 mm
Laminate weight: 302 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Delivery notes for this product:
Delivery up to 2,5 m² only folded up. More than 3 m² only on roll.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks by working with glass fiber fabrics and epoxy resins:
Boat Building (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Glass Fabric Constructions:

Glass Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of glass fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

160 g/m² Glass fabric Bidiagonal | HP-B160E...

Construction:	+/-45°
Weight:	160 g/m²
Width:	127 cm

4,71 EUR

Epoxy Resin multi-purpose system 45 min...

The Epoxy-System HP-E45KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with working time (pot life) about 45 minutes. It is versatile for laminating and for bonding / gluing applications.

Bonding, Laminating, Mould Making

from 6,90 EUR

Glow in the dark light powder | HP-GLOW

Glow time: up to 10 hours, depending on the amount of light stored or light intensity
Ideal for casting applications such as for example River tables, jewelry floor markings, stair edges, emergency exits, varnishes, furniture etc.
Compatible with many basic materials
Charging by: UV-radiation, daylight, artificial light and many more

from 9,98 EUR

Covering Colour Pigments | FD

The opaque colour pigments of the HP-FD series are used for colouring layers (gel and topcoats). They are suitable for laminating and casting resins.

Suitable for unsaturated polyester resins, epoxy resins, vinylester, polyurethan.

from 2,90 EUR

15 mm Laminating brush | HP-L1107

Width:	15 mm
Bristle:	Black China bristle
Stalk:	Wood stalk

0,85 EUR

This product is similar to:

Silicone rubber | HP-SI30GB

Medium viscous mould making
High tear strength
Working time 30 minutes
Smooth cast without air bubble

from 20,90 EUR

Mould Covering System, black - Epoxy Resin...

The Epoxy Resin System HP-E30FB is an aluminium-filled, high-viscosity combination of resin and hardener with high hardness.

Mould covering system, 30 minutes working time

from 28,90 EUR

Coating - Laminating System - 1.5kg - Epoxy...

The Epoxy Covering Resin System HP-E30TDS is an unfilled, thixotropic combination of resin and hardener with a medium working time (pot life). For high quality Pondbuilding Coverings.
Available in several colours or clear, adjustable with color paste HP-FP to RAL.

36,90 EUR
24,60 EUR per Kg

Mould Covering System, blue-grey - Epoxy...

High-quality mould covering resin
Non-drip, without run-off on vertical surfaces -high thixotropic, blue-grey coloured
Vacuum degassed
User friendly mixing ratios (100:10)
For abrasion-and breaking resistance surfaces with good thermal conductivity.
Innovative formulation, free of DETA1 with high styrene resistance.

from 29,90 EUR

Customers who bought this product bought also the following products:

Degassing additive | HP-BEL51

HP-BEL51 is a defoaming and degassing agent
Solution of functional polymers and polysiloxanes

Stir it preferably into the base resin before adding other components. It is also possible to add the additive to the finished systems.

from 3,45 EUR

Covering System - Topcoat - Epoxy Resin...

This epoxy-system is an transparent, unfilled combination of resin and hardener with medium working time and low viscosity.

Topcoat, High UV-stability, 40 minutes working time

from 5,50 EUR