Main page » Vacuum Technology » Peelply » Twill » 105 g/m² Peel Ply Twill (Width: 25 cm) | HP-T105P25

Preview: 105 g/m² Peel Ply Tape Twill (Width: 25 cm) | HP-T105P25

Preview: Peel ply twill for laminate construction

105 g/m² Peel Ply Twill (Width: 25 cm) | HP-T105P25

Mobile Preview: 105 g/m² Peel Ply Tape Twill (Width: 25 cm) | HP-T105P25

Mobile Preview: Peel ply twill for laminate construction

105 g/m² Peel Ply Twill (Width: 25 cm) | HP-T105P25

Product No.:: HP-T105P25
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: 120 m²
Minimum order:: 5

Sliding scale prices

5 m²: per 3,75 EUR
10-20 m²: per 3,33 EUR
25-45 m²: per 2,92 EUR
50-95 m²: per 2,50 EUR
100-195 m²: per 2,17 EUR
> 195 m²: per 1,92 EUR

3,75 EUR

incl. 19% tax excl. Shipping costs

Description

105 g/m² Peel Ply Twill (Width: 25 cm) | HP-T105P25

It is made of Nylon and is added into epoxy- or polyester resins as the first and/or last layer of the construction. After hardening, just before further processing it has to be peeled of slowly and in a sharp angle. The Peel Ply leaves an evenly rough, lubricant film free and adhesive surface behind. Sanding or cleaning of the surface is not necessary before sticking or coating. The Peel Ply can´t remain in the construction therefore is a red or blue tracer thread woven into the fabric.

Weight: 105 g/m²

Weave: Twill
Width: 25 cm
Material: Nylon 6.6 cleaned

Yarn type specifications:
Warp: 21 y/cm

Weft: 21 y/cm

Advantages of Peel Ply Fabric:

Accurate upper surface
A bit rough after tearing off, absolutely clean and free of dust
Ideal subsoil for bonding or further laminating/painting
Saves time, no need to grind with sand-paper or removing of grinding dust

In some cases it is desired to have a slip resistance of the component (e.g. stand space of surf boards, boat decks). The surface is after tearing the Peel Ply off ready for use.

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks by working with reinforcement fabrics:
Boat Building (PDF)

further working notes you will find here

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Peel Ply Constructions:

Peel Ply are available in plain or twill. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of peel ply:
Product information for safe handling (PDF)

This product is compatible with (for example):

30 g/m² Perforated Release Film | HP-RF30/130...

Material:	HDPE
Weight:	30 g/m²
Width:	130 cm
Colour:	Blue, transparent

3,27 EUR

Lock valve with push-in connector 12/12 mm...

Lock valve for control the airflow by evacuation
Both sides of the same diameter
For tubes with a outside-diameter of 12 mm

14,65 EUR

80 g/m² Non-woven absorber | HP-VP80P

Material:	100% polyester (black)
Weight:	80 g/m²
Width:	80 cm

2,69 EUR

Spray adhesive 400 ml | HP-FIX400

To fix reinforcing fabrics (carbon, glas, aramid, …) core materials or vacuum aids in place
Application in combination with the epoxy resins from HP-Textiles
Excellent spray control with adjustable spray button and dosage valve
Bonding wood, textiles, rubber, foams, many synthetic materials, paper and other base materials