Main page » Reinforcement Fabrics » Aramid Fabric » 310 g/m² Aramid Fabric Twill | HP-T310A

310 g/m² Aramid Fabric Twill | HP-T310A

Name: 310 g/m² Aramid Fabric Twill | HP-T310A
SKU: HP-T310A
Price: 31.89 EUR
Availability: InStock

Product No.:: HP-T310A
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-2,5 m²: per 31,89 EUR
3-4,5 m²: per 29,69 EUR
5-9,5 m²: per 27,97 EUR
10-24,5 m²: per 26,48 EUR
25-49,5 m²: per 24,93 EUR
50-99,5 m²: per 23,21 EUR
> 99,5 m²: per 22,37 EUR

31,89 EUR

incl. 19% tax excl. Shipping costs

m²:

Add to wish list

Ask about product

Description

Aramid Fiber Fabric Twill | HP-T310A

Weight: 310 g/m²
Weave: Twill 2/2
Width: 100 cm

Yarn type specifications:
Warp: 4,6 y/cm (316 tex)

Weft: 4,6 y/cm (316 tex)

Thickness: 0,61 mm

** The length of the rolls may vary. Therefore it is possible that a position from 10m² consists of several rolls. **

Areas of application:

Ship and boat construction, modelling, aircraft construction, sports equipment making, motor sport, ...

Properties Aramid Fiber:
Aramid fibres are characterized by a high tenacity, a very good impact strength and abrasion resistance. Further properties are e.g. a good dampening ability, excellent chemical resistance and non-flammability.

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 456 g/m²
Laminate thickness: 0,61 mm
Laminate weight: 767 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Working Notes & Support

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Aramid Fabric Constructions:

Aramid Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of aramid fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

High Performance Laminating Resin Epoxy HP-E56L

High Performance Laminating System - Epoxy...

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E55L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

from 5,50 EUR

Scissors "OPTIMA" | HP-L1054

Lenght:	28 cm
Blade lenght:	12 cm
Colour:	blue

7,45 EUR

Covering System - Topcoat - Epoxy Resin...

This epoxy-system is an transparent, unfilled combination of resin and hardener with medium working time and low viscosity.

Topcoat, High UV-stability, 40 minutes working time

from 5,50 EUR

Cleaning and degreasing agent - Acetone...

Acetone is a solvent and is usually used to clean tools from resin, that has not yet dried completely. Furthermore it is often used for degreasing surfaces (e.g. fibre glass or carbon fibre).

Cleaning and degreasing agent

from 9,90 EUR

28 cm plastic Stirrer | HP-L1128

Colour:	Black
Material:	Plastic
Size:	28 cm incl hole and retaining hooks

0,95 EUR

Customers who bought this product bought also the following products:

PE hose for vacuum moulding standard | HP-VZ1020...

The PE-Hose is used in the vacuum-injection (vacuum-infusion) process. It can be used mainly as a disposable product in combination with our connectors POM.

Available dimensions:
Material:	PE
Outer-Ø:	12 mm
Inner-Ø:	10 mm

1,48 EUR

Infusion Connector 12 mm | HP-VZ1550

No imprints in the laminate and easy handling combined with the vacuum flat channel HP-VZ1520 (50 mm) or HP-VZ1530 (100 mm)

3,96 EUR

Vacuum Flat Channel, 50 mm | HP-VZ1520

Flat channel for vacuum infusion. It consists of a three-dimensional polyester filament core structure wrapped in a non-woven polyester. Very flexible and easy to cut to the appropriate size.

Advantages:

No print on the laminate
Excellent resin flow
Easy application and easy cut

1,82 EUR

Infusion System - Epoxy - Hardener component...

The hardener HP-E30RI allows a pot-life of 30 minutes.
Base of the series HP-E3000RI is an unfilled epoxy-resin, which is mixable with different hardeners for severals applications. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 21,90 EUR