Infusion System - Epoxy - Hardener component | HP-HTE30RI
Vacuum Infusion, Pressure Injection | Epoxy Resin HP-HTE30RI
The hardener HP-E30RI allows a pot-life of 30 minutes.Base of the series HP-E3000RI is an unfilled epoxy-resin, which is mixable with different hardeners for severals applications.
Here you will find the suitable resin
Features & Benefits
- For application in modelmaking, automotive-industry and building of boats and rotor blades
- Excellent wet-out in infusion- or injection-process
- Warm-hardening, demouldable at higher temperature
- High dynamic and static strength
- With thixotroping agent HP-PK22 applicable for handlaminating
- Glas transition temperature 98°C (with hardener HP-E120RI)
- Usable for RTM / RI - process
Product Properties Epoxy Resin HP-HTE30RI
- Colouring: slightly yellow
- Mixing ratios: 100 parts resin / 30 parts hardener (by weight)
- Working Time (pot life): 35 min (at 20°C or 68°F)
- Working Temperature: 20°C
Working notes and decision guidance for Epoxy Resins
Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.Practical tips for epoxy resins (PDF)
Vacuum-Infusion; the IMC/MTI®-Process (PDF)
Vacuum-Infusion; the IMC/MTI®-Process (Video)
Decision guidance epoxy resins (PDF)
Hazard Statements
Hardener:
Caution
H302+H312 Harmful if swallowed or in contact with skin.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H361fd Suspected of damaging fertility. Suspected of damaging the unborn child.
H373 May cause damage to organs through prolonged or repeated exposure.
H411 Toxic to aquatic life with long lasting effects.
