Subscribe to Newsletter

 
 
175 g/m² Unidirectional-Carbonfabric-Tape (50 mm) | HP-U175C/050
175 g/m² Unidirectional-Carbonfabric-Tape (50 mm) | HP-U175C/050
175 g/m² Unidirectional-Carbonfabric-Tape (50 mm) | HP-U175C/050

175 g/m² Unidirectional-Carbonfabric-Tape (50 mm) | HP-U175C/050

Product No.:
HP-U175C/050
ca. 1-3 days ca. 1-3 days (abroad may vary)
Minimum order:
5
Sliding scale prices
5 Meters
per 3,75 EUR
10-20 Meters
per 3,04 EUR
25-45 Meters
per 2,58 EUR
50-95 Meters
per 2,36 EUR
> 95 Meters
per 2,05 EUR
3,75 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

175 g/m² Unidirectional-Carbonfabric-Tape (50 mm) | HP-U175C/050

Construction: 0°
Fibre: HT-Fibre
Weight: 175 g/m²
Width: 50 mm
 
Fibre orientation:
Warp: 7,0 y/cm (3K-200 tex)
Weft: 4x2 y/cm (EC9-34 tex)
 
Technical Data Sheet Carbon Fabric HP-P200C
Areas of application: 
Tanks, pipes, hulls, model marking, boat construction, sport equipment, repairs & reinforcement, ...

► Laminate calculator
Here you can calculate specific values for your application.
Working Notes & Support
Working Notes:
In this instruction you will find tips & tricks for epoxy resins and fabrics in boatbuilding:
Boatbuilding (PDF)

further working notes you will find here


Decision guidance for Epoxy Resins:
Overview Epoxy Resins (PDF)


Working Notes:
Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator
Product Safety
Product Safety (GPSR):
Here you will find information for the safe use of carbon fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

Carbon Fabric 200 g/m² Twill | HP-T200C
200 g/m² Carbon Fabric Twill | HP-T200C
Weight: 200 g/m²
Weave: Twill 2/2
Width: 100 cm
27,89 EUR
Laminating Resin Epoxy HP-E28L
Laminating System - Epoxy Resin | HP-E110L...

The Epoxy-System HP-E110L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 110 minutes.

These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.

from 14,90 EUR
Epoxy infusion hardener HP-HTE30RI
Infusion System - Epoxy - Hardener component...

The hardener HP-E30RI allows a pot-life of 30 minutes.
Base of the series HP-E3000RI is an unfilled epoxy-resin, which is mixable with different hardeners for severals applications. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 21,90 EUR
Stirrer 20cm plastic
20 cm plastic Stirrer | HP-L1120
Colour: Red
Material: Plastic
Size: 20 cm incl hole and retaining hooks
0,83 EUR
Glow in the dark light powder | HP-GLOW
Glow in the dark light powder | HP-GLOW
  • Glow time: up to 10 hours, depending on the amount of light stored or light intensity
  • Ideal for casting applications such as for example River tables, jewelry floor markings, stair edges, emergency exits, varnishes, furniture etc.
  • Compatible with many basic materials 
  • Charging by: UV-radiation, daylight, artificial light and many more
from 9,98 EUR

Customers who bought this product bought also the following products:

High Performance Laminating System - Epoxy Resin | HP-E111L
High Performance Laminating System - Epoxy...
The Epoxy-System HP-E111L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 110 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.
on request
Carbon braided Sleeve 3K (D= 35 mm at 45°) | HP-BSC035/96/3
Carbon braided Sleeve 3K (D= 35 mm at 45°)...
Material: 3K 200tex (HT-Fibre)
Number of ends: 96
Diameter at 45°: 35 mm
Area of applications: 15 - 45 mm

**Offered and sold in stretched condition!**
7,54 EUR
Epoxy adhesive resin system for metal, wood, rubber, ceramics, rigid foams and many plastics
Adhesive System - Epoxy Resin | HP-E60K
The Epoxy Adhesive System HP-E60K is an unfilled, medium-viscosity combination of resin and hardener with medium reaction time.

Processing time of 60 minutes, Cold-hardening, medium viscous
from 10,90 EUR
Epoxy Adhesive HP-E120K
Adhesive System - Epoxy Resin | HP-E120K
The Epoxy Adhesive System HP-E120K is an unfilled, medium-viscosity combination of resin and hardener with medium reaction time.

Processing time of 120 minutes, adhere metal, wood, rubber, ceramic, rigid foams and many plastics
from 10,90 EUR