Main page » Reinforcement Fabrics » Carbon Fabric » Twill » 200 g/m² Carbon Fabric Twill | HP-T200C

Preview: Carbon Fabric 200 g/m² Twill | HP-T200C

200 g/m² Carbon Fabric Twill | HP-T200C

Mobile Preview: Carbon Fabric 200 g/m² Twill | HP-T200C

200 g/m² Carbon Fabric Twill | HP-T200C

Product No.:: HP-T200C
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-2,5 m²: per 27,89 EUR
3-4,5 m²: per 25,99 EUR
5-9,5 m²: per 24,69 EUR
10-24,5 m²: per 23,50 EUR
25-49,5 m²: per 21,90 EUR
50-99,5 m²: per 19,85 EUR
> 99,5 m²: per 18,98 EUR

27,89 EUR

incl. 19% tax excl. Shipping costs

Description

Carbon Fiber Fabric Twill | HP-T200C

Weight: 200 g/m²
Weave: Twill 2/2
Width: 100 cm

Yarn type specifications:
Warp: 5 y/cm (3K 200Tex)

Weft: 5 y/cm (3K 200Tex)

Thickness: 0,32 mm

3K Mitsubishi Pyrofil
** The length of the rolls may vary. Therefore it is possible that a position from 10 m² consists of several rolls. **

Areas of application:

Modelling, sport equipment making, ship and boat construction, motor sport, carbon design, orthopaedic technic ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 240 g/m²
Laminate thickness: 0,32 mm
Laminate weight: 440 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks to produce carbon-design parts:
Carbon Coating (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Carbon Fabric Constructions:

Carbon Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of carbon fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

18cm - 200g/m² bidiagonal carbon scrim | HP-B200/18C

18cm - 200g/m² Bidiagonal carbon fabric Tape...

**Special item from industrial production, very good quality. Very soft and good drapable and good impregnation properties.**

weight: 200 g/m²
width: 18 cm
+45° 100 g/m² HT-Fibre 50K
- 45° 100 g/m² HT-Fibre 50K

instead 6,65 EUR
only 3,99 EUR
You save 40%

Covering System - Topcoat - Epoxy Resin...

This epoxy-system is an transparent, unfilled combination of resin and hardener with short working time and low viscosity.

Topcoat, 25 minutes working time

from 7,90 EUR

8 mm Handle for paint rollers | HP-L1023

Diameter:	8 mm
Material strap:	Round steel
Material handle:	Plastic

2,24 EUR

Glow in the dark light powder | HP-GLOW

Glow time: up to 10 hours, depending on the amount of light stored or light intensity
Ideal for casting applications such as for example River tables, jewelry floor markings, stair edges, emergency exits, varnishes, furniture etc.
Compatible with many basic materials
Charging by: UV-radiation, daylight, artificial light and many more

from 9,98 EUR