Subscribe to Newsletter

 
 
Carbon Fabric 80 g/m² Plain
Carbon Fabric 80 g/m² Plain | HP-P80C
Preview: Carbon Fabric 80 g/m² Plain
Preview: Carbon Fabric 80 g/m² Plain | HP-P80C
80 g/m² Carbon Fabric Plain | HP-P80C
Carbon Fabric 80 g/m² Plain
Carbon Fabric 80 g/m² Plain | HP-P80C
Mobile Preview: Carbon Fabric 80 g/m² Plain
Mobile Preview: Carbon Fabric 80 g/m² Plain | HP-P80C

80 g/m² Carbon Fabric Plain | HP-P80C

Product No.:
HP-P80C
Shipping time:
ca. 1-3 days ca. 1-3 days (abroad may vary)
Sliding scale prices
1-2,5 m²
per 79,98 EUR
3-4,5 m²
per 76,70 EUR
5-9,5 m²
per 73,72 EUR
10-24,5 m²
per 70,81 EUR
25-49,5 m²
per 68,43 EUR
> 49,5 m²
per 65,95 EUR
79,98 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

Carbon Fiber Fabric Plain | HP-P80C

Weight: 80 g/m²
Weave: Plain
Width: 100 cm
 
Yarn type specifications:
Warp: 6 y/cm (1K  67Tex)
Weft: 6 y/cm (1K  67Tex)
Thickness: 0,12 mm
 
Technical Data Sheet Carbon Fabric HP-P200C
 
Areas of application: 
High-strength, thin laminates, high-strength coatings/sandwich constructions, model constructions, sport equipment making, design, orthopaedic technic, ...
 
Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 96 g/m²
Laminate thickness: 0,13 mm
Laminate weight: 176 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.
Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks to produce carbon-design parts:
Carbon Coating (PDF)

 
Laminate Calculator:
Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

 

Characteristics of Carbon Fabric Constructions:

Carbon Fabrics are available in different constructions. The important characteristics you will find below:
 
Plain
  • The simplest weave
  • Very slip-resistant
  • Bad drapability
  • Suitable for flat plates or easy moulds

Twill
  • Diagonally running lines are characteristic
  • Better drapability than plain weave
  • Less slip-resistant
  • Suitable for complicated geometries

Satin
  • Suitable for complicated geometries
  • Very good drapability
  • Low slip-resistance
  • Less mesh crossing, therefore strength in the laminate
  • Leaves a very smooth surface
Product Safety
Product Safety (GPSR):
Here you will find information for the safe use of carbon fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

Casting system resin transparent HP-E50GB
Casting System (transparent) - Epoxy Resin...
  • Transparent, low shrink-casting with tacky-free surfaces
  • Very good flow behaviour (low-viscosity)
  • Cold-hardening, demouldable at room-temperature
  • High fillable casting resin
  • Cause pressure-resistant and impact-resistant (tough) moulds / components with high strength and very less shrinkage

from 5,50 EUR
Plastic cup | HP-L1069
Mixing cup 300 ml | HP-L1069
Material: hard paper with PE coating, round
Volume: 300 ml
Quantity/Package: 25 or 50 pieces per package
0,25 EUR
Microballons | HP-MB2
Microballoons | HP-MB2
  • Mixing of pressure-resistant, non-combustible, reduced-shrinking molding compounds
  • Mixture remains very fluid (due to spherical structure)
  • Creation of lightweight putties
from 3,90 EUR
Color Pastes | HP-FPN
Pigment paste opaque | FPN
  • Liquid Pigment pastes for colouring
  • Due to a high pigment concentration very efficient in consumption
  • Good colouring
  • Suitable for solvent free for epoxy resin and polyurethane systems​
from 3,29 EUR

This product is similar to:

30 g/m² C-Glass Non Woven | HP-VJ30C
30 g/m² C-Glass Non Woven | HP-VJ30C
Weight: 30 g/m²
Construction: Non woven
Width: 100 cm
2,14 EUR
50 g/m² Unidirectional Carbonfabric | HP-U050/50C
TOP
50 g/m² Unidirectional Carbonfabric | HP-U050/50C...
Construction: 0°
Fibre: HT-Fibre
Weight: 50 g/m²
Width: 50 cm
12,85 EUR
50 g/m² C-Glass Non Woven | HP-VJ50C
50 g/m² C-Glass Non Woven | HP-VJ50C
Weight: 50 g/m²
Construction: Non woven
Width: 100 cm
2,14 EUR

Customers who bought this product bought also the following products:

Epoxy infusion resin HP-E120RI
Infusion System - Epoxy Resin | HP-E120RI...

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 200 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 58,90 EUR
145 g/m² Vaccum Mesh | HP-IM145-100
145 g/m² Vaccum Mesh | HP-IM145-100
Material: HDPE
Weight: 145 g/m²
Width: 100 cm
4,14 EUR
Spiral hose connector | HP-VZ1540
Spiral hose connector 12 x 14,6 mm | HP-VZ1540...
Spiral hose connector for easy connection of the vacuum infusion pipe.
Suitable for 12 mm pipe and spiral hoses up to 14,6 mm outside diameter.
4,68 EUR
Epoxy resin multi-purpose system for laminating, gluing and many other applications
Epoxy Resin multi-purpose system 25 min...
The Epoxy-System HP-E25KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with short working time (pot life). It is versatile for laminating and for bonding / gluing applications.

Bonding, Laminating, Mould making, Applicable from 5°C temperature
from 6,90 EUR