50 g/m² Unidirectional Carbonfabric | HP-U050/50C
TOP
50 g/m² Unidirectional Carbonfabric | HP-U050/50C
Construction: 0°
Weight: 50 g/m²
Width: 50 cm
Weight: 50 g/m²
Width: 50 cm
Fibre orientation:
| 0°: | 50 g/m² (HT-Fibre 50K or 24K) |
Advantages of Carbonfabric HP-U050/50C:
- Thickness and weight over the whole fabric´s width is constant
- The surface of filaments are smooth, therefore the fabric is very handy to process
- All filaments are strictly parallel, not twisted to the right or left
- All filaments are sufficiently strained, therefore the final product have a good physical-mechanical
Areas of application:
Modelling, sport equipment making, ship and boat construction, motor sport, ...
Calculated data for hand laminate with 45 volume percent fibres:
Resin consumption: 39,5 g/m²
Laminate thickness: 0,06 mm
Laminate weight: 89,5 g/m²
► Laminate calculator
Here you can calculate specific values for your application.
Delivery notes for this product:
Standard role length: 100 m² / From 101 m² then the total quantity are on minimum 2 roles.
Resin consumption: 39,5 g/m²
Laminate thickness: 0,06 mm
Laminate weight: 89,5 g/m²
► Laminate calculator
Here you can calculate specific values for your application.
Delivery notes for this product:Standard role length: 100 m² / From 101 m² then the total quantity are on minimum 2 roles.
Working Notes:
In this instruction you will find tips & tricks for epoxy resins and fabrics in boatbuilding:
Boatbuilding (PDF)
further working notes you will find here
Decision guidance for Epoxy Resins:
Overview Epoxy Resins (PDF)
Working Notes:
Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator
Characteristics of unidirectional Carbonfabrics (0°):
Unidirectional
|
|
