Subscribe to Newsletter

 
 
50 g/m² Vacuum Bagging Film Tube | HP-VFT50/060
50 g/m² Vacuum Bagging Film Tube | HP-VFT50/060
Preview: 50 g/m² Vacuum Bagging Film Tube | HP-VFT50/060
Preview: 50 g/m² Vacuum Bagging Film Tube | HP-VFT50/060
50 g/m² Vacuum Bagging Film Tube | HP-VFT50/060
50 g/m² Vacuum Bagging Film Tube | HP-VFT50/060
50 g/m² Vacuum Bagging Film Tube | HP-VFT50/060
Mobile Preview: 50 g/m² Vacuum Bagging Film Tube | HP-VFT50/060
Mobile Preview: 50 g/m² Vacuum Bagging Film Tube | HP-VFT50/060

50 g/m² Vacuum Bagging Film Tube | HP-VFT50/060

Product No.:
HP-VFT50/060
ca. 1-3 days ca. 1-3 days (abroad may vary)
Minimum order:
5
Sliding scale prices
5-9,9 Meters
per 2,61 EUR
10-24,9 Meters
per 2,43 EUR
25-49,9 Meters
per 1,95 EUR
50-99,9 Meters
per 1,69 EUR
100-249,9 Meters
per 1,48 EUR
> 249,9 Meters
per 1,26 EUR
2,61 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

50 g/m² Vacuum Bagging Film Tube | HP-VFT50/060

Our Vacuum bagging Film is a flexible green transparent film to be used in the vacuum assisted resin transfer moulding for manufacturing all types of composites mould. It is used due to its excellent physical properties such as high elongation, good flexibility, toughness and very less permeability. The ends are sealed with our vacuum sealing tape (HP-ST12X80 or HP-ST10X3/210).

Material: PA
Diameter: 38,20 cm
Weight: 50 g/m²
Width: 60 cm
 
Technical data:
Temperature resistance: 195°C
Melting point: 205°C
Thickness: 50µm
Colour: green, transparent
Elongation at break: >330%
 
Technical Data Sheet Vacuum Bagging HP-VFT50/060
► Laminate calculator
Here you can calculate specific values for the vacuum infusion.
Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks to produce carbon-design parts:
Carbon Coating (PDF)

 
Laminate Calculator:
Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

This product is compatible with (for example):

infusionsystem resin and hardener HP-E200GL
Infusion System -Epoxy Resin | HP-E200GL
The hardener HP-E200GL allows a pot-life of 200 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection
from 5,90 EUR
High Performance Laminating Resin Epoxy HP-E56L
High Performance Laminating System - Epoxy...

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

from 5,50 EUR
Sealant Tape | HP-ST12X3/80
Sealant Tape | HP-ST12X3/80
Material: Butyl Rubber
Width: 12 mm
Thickness: 3 mm
Length: 15 mtr.
10,41 EUR
PE hose for vacuum moulding standard | HP-VZ1010
PE hose for vacuum moulding standard | HP-VZ1010...
The PE-Hose is used in the vacuum-injection (vacuum-infusion) process. It can be used mainly as a disposable product in combination with our connectors POM.
 
Available dimensions:
Material: PE
Outer-Ø: 10 mm
Inner-Ø: 8 mm
1,33 EUR
80 g/m² Non-woven absorber | HP-VP80P
80 g/m² Non-woven absorber | HP-VP80P
Material: 100% polyester (black)
Weight: 80 g/m²
Width: 80 cm
2,69 EUR

This product is similar to:

Manometer vertical Vacuum | HP-VZ1180
Manometer vertical Vacuum | HP-VZ1180
  • Manometer standing - class 2.5
  • Display area -1 bar to 0 bar (Vacuum)
  • Bar-display (black) / PSI-display (red)
  • Connection: G 1/4" below
  • Diameter 50 mm
9,66 EUR
Stud to close 10 mm | HP-VZ1160
Stud to close 10 mm | HP-VZ1160
  • Stud to close up connectors
  • For connectors with a inside-diameter of 10 mm
1,36 EUR
Hose connector straight 10/10mm HP-VZ1310
Push Connector 10/10mm HP-VZ1310
- Push connector for easy connection
- both sides of the same diameter
- for tubes with a inside-diameter of 10mm
Compatible with vacuum hose: 
HP-VZ1020    

"Image similar"
0,81 EUR

Customers who bought this product bought also the following products:

Epoxy resin multi-purpose system 45 min (low viscous) | E45L
Multi-Purpose System (low viscous) | BM-E45L...
  • 2K epoxy resin multi-purpose system
  • Low viscous (thin)
  • Versatile use
  • 45 min pot life
  • Processing temperature from 18°C onwards


laminate-, mould making, adhesive, spatula and top coat resin system

from 10,90 EUR
Casting system resin transparent HP-E50GB
Casting System (transparent) - Epoxy Resin...
  • Transparent, low shrink-casting with tacky-free surfaces
  • Very good flow behaviour (low-viscosity)
  • Cold-hardening, demouldable at room-temperature
  • High fillable casting resin
  • Cause pressure-resistant and impact-resistant (tough) moulds / components with high strength and very less shrinkage

from 5,50 EUR
600g/m² Unidirektional - Carbongelege SP-U600/50C
600g/m² Unidirectional-Carbon Fabric SP-U600/50C...

Structure:       0°
Fibre:             HT-Fibre/50K
Weight:          600g/m²
Width:            50cm

*Please enter below the desired quantity in m²

instead 31,50 EUR
only 15,75 EUR
You save 50%
Carbon fabric Atlas
300g/m² Carbonfabric SP-S290/120CPU incl....
** special item from automotive production **

Technical Data
weight:    290g/m² (dry weight)
PU-Binder:   approx. 10g/m²
Weave: Satin 1/4
width:   120cm
Warp: 7,4 threads/cm (3K 200Tex Toray FT300B)
Weft: 7,2 threads/cm (3K 200Tex Toray FT300B)
Thickness:   0,45mm
instead 51,00 EUR
only 25,50 EUR
You save 50%