Vacuum Infusion, Pressure Injection | Epoxy Resin HP-E200GL

The HP-E200GL series is based on an unfilled epoxy resin, which can be individually adjusted with different hardeners for the respective application and thus enables pot lives of approx. 200 minutes.

A special feature of this series is a high initial glass transition temperature (Tg) by hardening at room temperature.

The use of the hardener HP-E200GL increases the maximum glass transition temperature (Tg MAX) up to 107°C.
The series also has a high transparency so that it is very suitable for visible carbon parts.

Features & Benefits:

extremely low viscosity, so it has a very good fibre wet-out
pot life time can be freely adjusted between 15 minutes (hardener HP-E15GL) and 300 minutes (hardener HP-E300GL)
glass transition temperature (Tg max) up to 107 °C (hardener HP-E200GL)
high static and dynamic strength
pressure injection methods (RTM, RIM,…)
vacuum-infusion methods (IMC/MTI, RI, VARI, SCRIMP®,…)
filament winding
hand laminating
optical application such as visible carbon parts (hardener HP-E200GL)

** For technological reasons, the approval from Germanischer Lloyd (valid until August 31, 21) is no longer being carried out. The article remains available unchanged. **

Technical Data

Product Properties Epoxy Resin HP-E200GL

Colouring: transparent
Mixing ratios: 100 parts resin / 30 parts hardener (by weight)
Working Time (pot life): 200min (at 20°C or 68°F)
Working Temperature: 20 - 30°C

Working Notes / Hazard Statements

Working notes and decision guidance for Epoxy Resins

Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.

Practical tips for epoxy resins (PDF)

Epoxy resin for boat building (PDF)

Decision guidance epoxy resins (PDF)

Hazard Statements

Resin:
Caution
H315 Causes skin irritation
H317 May cause an allergic skin reaction
H318 Causes serious eye damage
H411 Toxic to aquatic life with long lasting effects

Hardener:
Caution
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H373 May cause damage to organs through prolonged or repeated exposure.
H412 Harmful to aquatic life with long lasting effects.

This product is compatible with (for example):

Liquid thickening agent | HP-BEL31

BEL31 is added as thixotroping agent in mixed systems
Solution of functional carbonyl diamides

After short interaction time, it takes to build a multidimensional network structure, which increases the anti-sagging properties without impairing levelling.

from 5,39 EUR

Infusion System - Epoxy Resin | HP-E120RI...

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 200 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 58,90 EUR