Main page » Reinforcement Fabrics » Carbon Fabric » UD-Fabric » 215 g/m² Unidirectional Carbonfabric | HP-U215C

Preview: 215 g/m² Unidirectional Carbonfabric | HP-U215C

215 g/m² Unidirectional Carbonfabric | HP-U215C

Mobile Preview: 215 g/m² Unidirectional Carbonfabric | HP-U215C

215 g/m² Unidirectional Carbonfabric | HP-U215C

Product No.:: HP-U215C
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-2,5 m²: per 19,40 EUR
3-4,5 m²: per 18,91 EUR
5-9,5 m²: per 17,95 EUR
10-24,5 m²: per 16,49 EUR
25-49,5 m²: per 14,99 EUR
50-99,5 m²: per 13,99 EUR
> 99,5 m²: per 13,58 EUR

19,40 EUR

incl. 19% tax excl. Shipping costs

Description

215 g/m² Unidirectional Carbonfabric | HP-U215C

Weight: 215 g/m²
Weave: Plain
Width: 100 cm

Yarn type specifications:
Warp: 2,5 Fd/cm (12K Hyosung H2250 800Tex)

Weft: 1,0 Fd/cm (E-Glas Hotmelt)

Areas of application:

Modelling, sport equipment making, ship and boat construction, motor sport, carbon design, orthopaedic technic ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 378 g/m²
Laminate thickness: 0,51 mm
Laminate weight: 693 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

** The length of the rolls may vary. Therefore it is possible that a position from 10m² consists of several rolls. **

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks to produce carbon-design parts:
Carbon Coating (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Carbon Fabric Constructions:

Carbon Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of carbon fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

High Performance Laminating Resin Epoxy HP-E56L

High Performance Laminating System - Epoxy...

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E55L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

from 5,50 EUR

Glow in the dark light powder | HP-GLOW

Glow time: up to 10 hours, depending on the amount of light stored or light intensity
Ideal for casting applications such as for example River tables, jewelry floor markings, stair edges, emergency exits, varnishes, furniture etc.
Compatible with many basic materials
Charging by: UV-radiation, daylight, artificial light and many more

from 9,98 EUR

Scissors "OPTIMA" | HP-L1054

Lenght:	28 cm
Blade lenght:	12 cm
Colour:	blue

7,45 EUR

28 cm plastic Stirrer | HP-L1128

Colour:	Black
Material:	Plastic
Size:	28 cm incl hole and retaining hooks

0,95 EUR

infusionsystem resin and hardener HP-E200GL

Infusion System -Epoxy Resin | HP-E200GL

The hardener HP-E200GL allows a pot-life of 200 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E120RI, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

from 5,90 EUR

This product is similar to:

125 g/m² Unidirectional-Carbonfabric-Tape...

Construction:	0°
Fibre:	HT-Fibre
Weight:	125 g/m²
Width:	50 mm

3,60 EUR

Customers who bought this product bought also the following products:

Covering System - Topcoat - Epoxy Resin...

This epoxy-system is an transparent, unfilled combination of resin and hardener with medium working time and low viscosity.

Topcoat, High UV-stability, 40 minutes working time

from 5,50 EUR

Thixotropypowder | HP-PK22

Is applied as a thickening and thixotropic agent in many organic systems
Amorphous pyrogenic silica
White colloidal powder of high purity

from 5,59 EUR

Laminating System - Epoxy Resin | HP-E55L...

The Epoxy-System HP-E55L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 55 minutes.

These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.

from 5,50 EUR

170 g/m² Aramid Fabric Twill | HP-T172A

Weight:	170 g/m²
Weave:	Twill
Width:	120 cm

22,49 EUR