Main page » Reinforcement Fabrics » Aramid Fabric » 170 g/m² Aramid Fabric Twill | HP-T172A

Preview: Aramid Fabric 170 g/m² Twill - P172A

170 g/m² Aramid Fabric Twill | HP-T172A

Mobile Preview: Aramid Fabric 170 g/m² Twill - P172A

170 g/m² Aramid Fabric Twill | HP-T172A

Product No.:: HP-T172A
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-2,5 m²: per 22,49 EUR
3-4,5 m²: per 21,00 EUR
5-9,5 m²: per 18,74 EUR
10-24,5 m²: per 16,99 EUR
25-49,5 m²: per 15,95 EUR
50-119,5 m²: per 13,98 EUR
> 119,5 m²: per 13,45 EUR

22,49 EUR

incl. 19% tax excl. Shipping costs

Description

Aramid Fiber Fabric Twill | HP-T172A

Weight: 170 g/m²
Weave: Twill
Width: 120 cm

Yarn type specifications:
Warp: 5,2 y/cm (158 tex)

Weft: 5,2 y/cm (158 tex)

Thickness: 0,335 mm

** The length of the rolls may vary. Therefore it is possible that a position from 10m² consists of several rolls. **

Areas of application:

Ship and boat construction, modelling, aircraft construction, sports equipment making, motor sport, ...

Properties Aramid Fiber:
Aramid fibres are characterized by a high tenacity, a very good impact strength and abrasion resistance. Further properties are e.g. a good dampening ability, excellent chemical resistance and non-flammability.

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 240 g/m²
Laminate thickness: 0,335 mm
Laminate weight: 410 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Working Notes & Support

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Aramid Fabric Constructions:

Aramid Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of aramid fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

80 g/m² Non-woven absorber | HP-VP80P

Material:	100% polyester (black)
Weight:	80 g/m²
Width:	80 cm

2,69 EUR

Covering System - Topcoat - Epoxy Resin...

This epoxy-system is an transparent, unfilled combination of resin and hardener with short working time and low viscosity.

Topcoat, 25 minutes working time

from 7,90 EUR

High Performance Laminating Resin Epoxy HP-E56L

High Performance Laminating System - Epoxy...

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E55L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

from 5,50 EUR

Cleaning and degreasing agent - Acetone...

Acetone is a solvent and is usually used to clean tools from resin, that has not yet dried completely. Furthermore it is often used for degreasing surfaces (e.g. fibre glass or carbon fibre).

Cleaning and degreasing agent

from 9,90 EUR

High Performance Laminating System - Epoxy...

The Epoxy-System HP-E111L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 110 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E110L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

from 26,50 EUR

This product is similar to:

205 g/m² Hybrid Fabric Carbon/Kevlar Twill...

Weight:	205 g/m²
Weave:	Twill
Width:	120 cm

30,82 EUR

205g/m² Hybrid Fabric Twill - Carbon/Kevlar...

Weight:	205 g/m²
Weave:	Twill 2/2
Width:	125 cm
Warp:	5 y./cm (158 Tex Aramid)
Weft:	6 y./cm ( 200 Tex 3K Carbon)

*Please enter below the desired quantity in m²

30,82 EUR

Customers who bought this product bought also the following products:

Epoxy resin for infusion process HP-E30RI

Infusion System - Epoxy Resin | HP-E30RI

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 30 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 61,90 EUR