Main page » Reinforcement Fabrics » Aramid Fabric » 61 g/m² Aramid Fabric Plain | HP-P60A

Preview: Aramid Fabric 61 g/m² Plain | HP-P60A

61 g/m² Aramid Fabric Plain | HP-P60A

Mobile Preview: Aramid Fabric 61 g/m² Plain | HP-P60A

61 g/m² Aramid Fabric Plain | HP-P60A

Product No.:: HP-P60A
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-2,5 m²: per 36,77 EUR
3-4,5 m²: per 34,39 EUR
5-9,5 m²: per 31,99 EUR
10-24,5 m²: per 30,58 EUR
25-49,5 m²: per 28,50 EUR
50-119,5 m²: per 27,25 EUR
> 119,5 m²: per 25,99 EUR

36,77 EUR

incl. 19% tax excl. Shipping costs

Description

Aramid Fiber Fabric Plain | HP-P60A

Weight: 61 g/m²
Weave: Plain
Width: 127 cm

Yarn type specifications:
Warp: 13,5 y/cm (22 tex)

Weft: 13,5 y/cm (22 tex)

Thickness: 0,12 mm

Areas of application:

Sandwich components, modelling, aircraft construction, sports equipment making, ...

Properties Aramid Fiber:
Aramid fibres are characterized by a high tenacity, a very good impact strength and abrasion resistance. Further properties are e.g. a good dampening ability, excellent chemical resistance and non-flammability.

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 86 g/m²
Laminate thickness: 0,12 mm
Laminate weight: 147 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Working Notes & Support

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Aramid Fabric Constructions:

Aramid Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

This product is compatible with (for example):

Covering System - Topcoat - Epoxy Resin...

This epoxy-system is an transparent, unfilled combination of resin and hardener with short working time and low viscosity.

Topcoat, 25 minutes working time

from 7,90 EUR

Covering System - Gelcoat - Epoxy Resin...

This epoxy-system is an transparent, unfilled combination of resin and hardener with short working time and medium viscosity.

Topcoat, 25 minutes working time

from 7,90 EUR

High Performance Laminating Resin Epoxy HP-E56L

High Performance Laminating System - Epoxy...

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

from 5,50 EUR

Sealant Tape | HP-ST12X3/80

Material:	Butyl Rubber
Width:	12 mm
Thickness:	3 mm
Length:	15 mtr.

10,41 EUR

Scissors "OPTIMA" | HP-L1054

Lenght:	29 cm
Blade lenght:	12 cm
Colour:	blue

7,45 EUR

Customers who bought this product bought also the following products:

Epoxy resin for infusion process HP-E30RI

Infusion System - Epoxy Resin | HP-E30RI

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 30 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 61,90 EUR

Infusion System - Epoxy - Hardener component...

The hardener HP-HTE120RI allows a pot-life of 200 minutes.
Base of the series HP-E3000RI is an unfilled epoxy-resin, which is mixable with different hardeners for severals applications. The series is usable for hand-laminating, too.

Vacuum Infusion, Pressure Injection

from 18,90 EUR