Subscribe to Newsletter

 
 
Silicone spray 200 ml | SSP
Silicone spray 200 ml | SSP
Silicone spray 200 ml | SSP

Silicone spray 200 ml | SSP

Product No.:
BM-SSP02
ca. 1-3 days ca. 1-3 days (abroad may vary)
5,95 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

Silicone spray 200 ml | SSP

Colourless lubricant and release agent based on silicone oil. Silicone spray is also used for silicone moulds.
 

Field of application:

  • Release agent for GfK and silicone moulds
  • Care agent for cured silicone moulds


Application:

  • Apply silicone spray in a suitable distance
  • Before coating of cured castings, we recommend removing silicone oils completely e.g. with thinner XB
Technical Data

Technical data 200 ml silicone spray SSP

  • Content: 200 ml
  • Colour: transparent
  • Consumption: approx. 10 ml / m2
  • Insoluble in water
Working notes / Hazard statements
Hazard statements


Danger
H222 Extremely flammable aerosol
H229 Pressurized container: may burst if heated
Gefahrenhinweis entzündlich

This product is compatible with (for example):

Silicone rubber | HP-SI6GB
Silicone rubber | HP-SI6GB
  • Medium viscous mould making
  • High tear strength
  • Working time 6-8 minutes
  • High fillable casting resin
from 20,90 EUR
Silicone rubber | HP-SI30GB
Silicone rubber | HP-SI30GB
  • Medium viscous mould making
  • High tear strength
  • Working time 30 minutes
  • Smooth cast without air bubble
from 20,90 EUR
Casting system resin transparent HP-E50GB
Casting System (transparent) - Epoxy Resin...
  • Transparent, low shrink-casting with tacky-free surfaces
  • Very good flow behaviour (low-viscosity)
  • Cold-hardening, demouldable at room-temperature
  • High fillable casting resin
  • Cause pressure-resistant and impact-resistant (tough) moulds / components with high strength and very less shrinkage

from 5,50 EUR
Measuring Jug | 1395
Graduated Measuring Jug PP | 1395
Plastic measuring jug with spout for precise measuring by volume ratio.
  • Material PP / polypropylene
  • Natural colour
  • Chemically stable
  • Food safe
from 2,90 EUR
Liquid foaming agent | HP-BEL11
Liquid foaming agent | HP-BEL11
  • BEL11 Liquid foaming agent
  • Solution of functional carbonyl diamides
  • Usable with: epoxy
To foam up of epoxy resins and to build foam laminates or in combination with sandwich materials (such as paddles or other components).
from 3,95 EUR

Customers who bought this product bought also the following products:

245g/m² carbon fabric, twill, 100cm wide | SP-T240C
Carbon Fabric 245g/m² Twill | SP-T240C

** 2nd choice with slight defects, damaged selvedges, shifts or worn warp threads. Still well suited for constructionasl applications **
** We point out that this 2nd choice is not entitled for complaint. **
 ** The length of the rolls may vary. Therefore it is possible that a position from 10m² consists of several rolls. **

weight: 245 g/m²
weave: twill 2/2
width:  100 cm
Yarn:  3K SYT45 Zhongfu

instead 33,70 EUR
only 23,59 EUR
You save 30%
Laminating Resin Epoxy HP-E28L
Laminating System - Epoxy Resin | HP-E28L...

The Epoxy-System HP-E28L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 28 minutes.

These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.

from 14,90 EUR
Stirrer 28 cm plastic
28 cm plastic Stirrer | HP-L1128
Colour: Black
Material: Plastic
Size: 28 cm incl hole and retaining hooks
0,95 EUR
High Performance Laminating Resin Epoxy HP-E56L
High Performance Laminating System - Epoxy...

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

from 5,50 EUR