Main page
»
Reinforcement Fabrics
»
Braided Sleeves / Flat Braid
»
Carbon Braided Sleeves
»
Carbon braided Sleeve 1K (D= 9,5 mm at 45°) | HP-BSC009/40/1

Carbon braided Sleeve 1K (D= 9,5 mm at 45°) | HP-BSC009/40/1
Carbon braided Sleeve 1K (D= 9,5 mm at 45°) | HP-BSC009/40/1
- Product No.:
- HP-BSC009/40/1
- Shipping time:
-
ca. 1-3 days (abroad may vary)
- Stock:
- Meters
This product ist not available.
Carbon braided Sleeve 1K (D= 9,5 mm at 45°) | HP-BSC009/40/1
The diameter of the braided sleeves can be varied by stretching. Ideally, the fiber angle should be between 30° and 60°. Optimal torsion and shear strengths are achieved at an angle of 45°. You can find more detailed information on our product data sheet.Material: 1K 67tex (HT-Fibre)
Number of ends: 40
Diameter at 45°: 9,5 mm
Area of applications: 4 - 13 mm
Angle: | 45° | stretched condition |
Width flat: | 15,00 mm | 4,00 mm |
Weight: | 3,80 g/m | 4,00 g/m |
Weight m²: | 251,50 g/m² |

Areas of applications:
Tanks, pipes, hulls, model making, boat construction, sport equipment, repairs & reinforcements.

Our carbon braided tapes are always offered and sold in stretched condition, since it is technically not possible to wrap the tapes with a fiber angle of 45°.
Due to the current export regulations it is not possible to ship this product outside the EU!
Product Safety (GPSR):
Here you will find information for the safe use of carbon fibres:
Product information for safe handling (PDF)
Here you will find information for the safe use of carbon fibres:
Product information for safe handling (PDF)
This product is compatible with (for example):

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.
Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.
⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E55L, this epoxy resin can be shipped to private customers in Germany without any restrictions.
Sales to international customers, whether private or commercial, are possible without any restrictions.
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E55L, this epoxy resin can be shipped to private customers in Germany without any restrictions.
Sales to international customers, whether private or commercial, are possible without any restrictions.
Shippingtime:
ca. 1-3 days
from 5,50 EUR
Shippingtime:
ca. 1-3 days

The Epoxy-System HP-E111L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 110 minutes.
Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.
Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.
⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E110L, this epoxy resin can be shipped to private customers in Germany without any restrictions.
Sales to international customers, whether private or commercial, are possible without any restrictions.
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E110L, this epoxy resin can be shipped to private customers in Germany without any restrictions.
Sales to international customers, whether private or commercial, are possible without any restrictions.
Shippingtime:
ca. 1-3 days
from 26,50 EUR
Shippingtime:
ca. 1-3 days

The Epoxy-System HP-E29L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 25 minutes.
Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.
⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E28L, this epoxy resin can be shipped to private customers in Germany without any restrictions.
Sales to international customers, whether private or commercial, are possible without any restrictions.
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E28L, this epoxy resin can be shipped to private customers in Germany without any restrictions.
Sales to international customers, whether private or commercial, are possible without any restrictions.
Shippingtime:
ca. 1-3 days
from 26,50 EUR
Shippingtime:
ca. 1-3 days

The hardener HP-E200GL allows a pot-life of 200 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.
Vacuum Infusion, Pressure Injection
Vacuum Infusion, Pressure Injection
⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E120RI, this epoxy resin can be shipped to private customers in Germany without any restrictions.
Sales to international customers, whether private or commercial, are possible without any restrictions.
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E120RI, this epoxy resin can be shipped to private customers in Germany without any restrictions.
Sales to international customers, whether private or commercial, are possible without any restrictions.
Shippingtime:
ca. 1-3 days
from 5,90 EUR
Shippingtime:
ca. 1-3 days