Subscribe to Newsletter

 
 
Carbon Fabric 93 g/m² Plain | HP-P96C
Carbon Fabric 93 g/m² Plain | HP-P96C
Preview: Carbon Fabric 93 g/m² Plain | HP-P96C
Preview: Carbon Fabric 93 g/m² Plain | HP-P96C
93 g/m² Carbon Fabric Plain | HP-P96C
Carbon Fabric 93 g/m² Plain | HP-P96C
Carbon Fabric 93 g/m² Plain | HP-P96C
Mobile Preview: Carbon Fabric 93 g/m² Plain | HP-P96C
Mobile Preview: Carbon Fabric 93 g/m² Plain | HP-P96C

93 g/m² Carbon Fabric Plain | HP-P96C

Product No.:
HP-P96C
ca. 1-3 days ca. 1-3 days (abroad may vary)
Stock:
15 m²
Sliding scale prices
1-2,5 m²
per 74,95 EUR
3-4,5 m²
per 72,89 EUR
5-9,5 m²
per 70,50 EUR
10-24,5 m²
per 67,98 EUR
25-49,5 m²
per 65,90 EUR
50-99,5 m²
per 63,55 EUR
> 99,5 m²
per 61,75 EUR
74,95 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

Carbon Fiber Fabric Plain | HP-P96C

Weight: 93 g/m²
Weave: Plain
Width: 100 cm
 
Yarn type specifications:
Warp: 7 y/cm (1K Torayca® T300B 1000-50B  67Tex)
Weft: 7 y/cm (1K Torayca® T300B 1000-50B  67Tex)
Thickness: 0,13 mm
 
Technical Data Sheet Carbon Fabric HP-P200C
 
Areas of application: 
High-strength, thin laminates, high-strength coatings/sandwich constructions, model constructions, sport equipment making, design, orthopaedic technic, ...
 
Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 112 g/m²
Laminate thickness: 0,15 mm
Laminate weight: 205 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.
Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks to produce carbon-design parts:
Carbon Coating (PDF)

 
Laminate Calculator:
Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

 

Characteristics of Carbon Fabric Constructions:

Carbon Fabrics are available in different constructions. The important characteristics you will find below:
 
Plain
  • The simplest weave
  • Very slip-resistant
  • Bad drapability
  • Suitable for flat plates or easy moulds

Twill
  • Diagonally running lines are characteristic
  • Better drapability than plain weave
  • Less slip-resistant
  • Suitable for complicated geometries

Satin
  • Suitable for complicated geometries
  • Very good drapability
  • Low slip-resistance
  • Less mesh crossing, therefore strength in the laminate
  • Leaves a very smooth surface
Product Safety
Product Safety (GPSR):
Here you will find information for the safe use of carbon fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

80 g/m² Unidirectional Carbonfabric | HP-U080/50C
80 g/m² Unidirectional Carbonfabric | HP-U080/50C...
Construction: 0°
Fibre: HT-Fibre
Weight: 80 g/m²
Width: 50 cm
on request
Epoxy adhesive resin system for metal, wood, rubber, ceramics, rigid foams and many plastics
Adhesive System - Epoxy Resin | HP-E60K
The Epoxy Adhesive System HP-E60K is an unfilled, medium-viscosity combination of resin and hardener with medium reaction time.

Processing time of 60 minutes, Cold-hardening, medium viscous
from 10,90 EUR
8 Hand Tools COARSE HP-ST-8F
Set of 8 Hand Tools Fine - Grit 320 - Perma-Grit®...
A popular kit Perma-Grit's abrasive tools cut, sand and shape in any direction. They outlast sandpaper thousands of times and can be used in all the materials, listed below and more. If you are unable to cut or shape something, try Perma-Grit's range of abrasives, you will be amazed. Simple tools to use, tough and will give far better results.
94,90 EUR
Mould Covering Epoxy Resin HP-E30FB
Mould Covering System, black - Epoxy Resin...
The Epoxy Resin System HP-E30FB is an aluminium-filled, high-viscosity combination of resin and hardener with high hardness.

Mould covering system, 30 minutes working time
from 28,90 EUR
500 ml plastic bottle with screw lid
500 ml plastic bottle | HP-L7025
  • Plastic bottle of HDPE natural
  • Volume: 500 ml
  • Incl. screw lid
1,40 EUR
1,40 EUR per pcs.

This product is similar to:

100 g/m² Unidirectional Carbonfabric | HP-U100/50C
150 g/m² Unidirectional Carbonfabric | HP-U150/50C...
Construction: 0°
Fibre: HT-Fibre
Weight: 150 g/m²
Width: 50 cm
16,29 EUR
100 g/m² Unidirectional Carbonfabric | HP-U100/50C
100 g/m² Unidirectional Carbonfabric | HP-U100/50C...
Construction: 0°
Fibre: HT-Fibre
Weight: 100 g/m²
Width: 50 cm
13,98 EUR
100 g/m² Bidiagonal Carbon fabric
100g/m² Bidiagonal carbon fabric with black...
Construction: +/-45°
Fibre: Toray
Weight: 100 g/m²
Width: 127 cm
27,97 EUR

Customers who bought this product bought also the following products:

Carbon Fabric 200g/m² Plain
200 g/m² Carbon Fabric Plain | HP-P200C
Weight: 200 g/m²
Weave: Plain
Width: 100 cm
27,89 EUR
Standard laminating Resin Epoxy HP-E55L
Laminating System - Epoxy Resin | HP-E55L...

The Epoxy-System HP-E55L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 55 minutes.

These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.

from 5,50 EUR
49 g/m² Glass Fabric "Finish" Plain | HP-P49EF
49 g/m² Glass Fabric "Finish" Plain | HP-P49EF...
Weight: 49 g/m²
Weave: Plain
Sizing: Finish
Width: 127 cm
4,19 EUR
300 g/m² Bidiagonal Carbon fabric
300 g/m² Bidiagonal carbon fabric 12K Toray...
Construction: +/-45°
Fibre: HT-Faser
Weight: 300 g/m²
Width: 94,50 cm
instead 28,28 EUR
only 14,14 EUR
You save 50%