Subscribe to Newsletter

 
 
Spiral Tube for vacuum moulding | HP-ST060
Spiral Tube for vacuum moulding | HP-ST060

Spiral Tube for vacuum moulding | HP-ST060

Product No.:
HP-ST060-05
ca. 1-3 days ca. 1-3 days (abroad may vary)
6,95 EUR
1,39 EUR per m

incl. 19% tax excl. Shipping costs

This product is compatible with (for example):

High performance laminating system HP-E29L

The Epoxy-System HP-E29L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 25 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

from 26,50 EUR
Spiral hose connector | HP-VZ1540
Spiral hose connector for easy connection of the vacuum infusion pipe.
Suitable for 12 mm pipe and spiral hoses up to 14,6 mm outside diameter.
4,68 EUR
High Performance Laminating System - Epoxy Resin | HP-E111L
The Epoxy-System HP-E111L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 110 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.
from 26,50 EUR
Scissors "OPTIMA" | HP-L1054
Lenght: 29 cm
Blade lenght: 12 cm
Colour: blue
7,45 EUR

Customers who bought this product bought also the following products:

Epoxy resin multi-purpose system 25 min (low viscous) | E25L
  • Multi purpose system
  • Unfilled, low viscous 2-components combination of resin and hardener
  • Working time approx. 25 minutes 
  • Applicable from 5°C temperature


Resin for laminate, top coat, adhesives, spatula and mould making.

from 10,90 EUR
Mould Covering Epoxy Resin HP-E25FB
The Epoxy Resin System HP-E25FB is an unfilled, thixotropic 2-component combination of resin and hardener with high sanding anpolishing properties-

Mould covering system, 25 minutes working time
from 39,40 EUR
MTI-Valve vacuum infusion | HP-VZ1450
  • Regulates itself the infusion of resin
  • No resin pooling at inlet point
  • Fibres are evenly covered with resin
  • Homogeneous laminate
  • Optimum fibre volume ratio
  • Highest quality of parts with reproducible results
  • Working hours and its costs can be saved
4,64 EUR