Main page » Vacuum Technology » Vac Checker® » Vac Checker® Digital Vacuum Gauge | HP-VZ1440

Preview: Vac Checker® Digital Vacuum Gauge | HP-VZ1440

Preview: Vacuum Checker for vacuum infusion

Preview: Digital Vacuum Meter | HP-VZ1440

Vac Checker® Digital Vacuum Gauge | HP-VZ1440

Mobile Preview: Vac Checker® Digital Vacuum Gauge | HP-VZ1440

Mobile Preview: Vacuum Checker for vacuum infusion

Mobile Preview: Digital Vacuum Meter | HP-VZ1440

Vac Checker® Digital Vacuum Gauge | HP-VZ1440

Product No.:: HP-VZ1440
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: Piece

299,00 EUR

incl. 19% tax excl. Shipping costs

Piece:

Description

Vac Checker® Digital Vacuum Gauge | HP-VZ1440

Digital vacuum gauge from DD-Compound - VAC CHECKER

Field of application: Vacuum infusion
Measurement transducer: Absolute pressure sensor
Battery type: 2 mignon cells AA

Technical data:

Storage temperature:	-20 bis +50 °C
Operationg temperature:	-20 up to +50 °C
Dimensions:	250 x 165 x 55 mm
Weight:	approx. 500 g
Protection class:	IP 42

Areas of applications and features:

Measuring range: 1.100 bis 0 mbar
Vacuum resolution: 0,01 hPa / 10 micron
Parameter: mmHg, Torr, mbar, hPa, micron, inH2O, inHg, Pa
Overload (rel): 5 bar (rel) / 72 psi (rel)

Attachments: Connection adapters for pipes with an internal diameter of: 6 mm / 8 mm / 10 mm

Battery Recycling Notice

Certificate of conformity

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks for the vacuum infusion process:
Vacuum infusion process (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

This product is compatible with (for example):

High Performance Laminating Resin Epoxy HP-E56L

High Performance Laminating System - Epoxy...

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E55L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

from 5,50 EUR

44 g/m² Perforated Release Film | HP-RF44/100...

Material:	HDPE
Weight:	44 g/m²
Width:	100 cm
Colour:	Blue, transparent

3,27 EUR

Y-Connector 10/10/10 mm | HP-VZ1120

Push-in Y-connector for easy connection
All sides of the same diameter
For tubes with a outside-diameter of 10 mm

5,38 EUR

105 g/m² Peel Ply Twill (Breite: 125 cm)...

Weight:	105 g/m²
Weave:	Twill
Width:	125 cm
Material:	Nylon 6.6

4,17 EUR

Vacuum pump 220V | HP-VZ2000

Motor 220V / 50Hz
Engine Power 750W
Max. vacuum 2 mbar absolute (correspond to a pressure of more than 10 tons/m²)
Max. efficency by barometic pressure: 333 litre / min (= 20 m³/h)
Suitable for continuous operating range between 2 and 400 mbar absolute

1.629,00 EUR

This product is similar to:

Vacuum Flat Channel, 50 mm | HP-VZ1520

Flat channel for vacuum infusion. It consists of a three-dimensional polyester filament core structure wrapped in a non-woven polyester. Very flexible and easy to cut to the appropriate size.

Advantages:

No print on the laminate
Excellent resin flow
Easy application and easy cut

1,82 EUR

Infusion System - Epoxy - Hardener component...

The hardener HP-HTE120RI allows a pot-life of 200 minutes.
Base of the series HP-E3000RI is an unfilled epoxy-resin, which is mixable with different hardeners for severals applications. The series is usable for hand-laminating, too.

Vacuum Infusion, Pressure Injection

from 18,90 EUR

Connector 10/10 mm | HP-VZ1050

Push-in connector for easy connection
Both sides of the same diameter
For tubes with a outside-diameter of 10 mm

3,87 EUR

70 g/m² Vacuum Bagging Film (Width: 400 cm)...

Material:	PA / PE / PA
Weight:	70 g/m²
Width:	400 cm
Colour:	transparent

0,88 EUR

Customers who bought this product bought also the following products:

Spiral Tube for vacuum moulding | HP-ST100...

Material:	Polyethylen
Diameter:	10,00 mm

from 8,95 EUR

PU hose for vacuum moulding flexible | HP-VZ1040...

PU hose with high wall thickness and excellent flexibility. Use as resin-carrying line as well as reusable suctionin combination with the vacuum pump HP-VZ1200. Multiple use in combination with our connectors IQS standard.

Available dimensions:
Material:	PU
Außen- Ø :	12 mm
Innen- Ø :	8 mm

3,55 EUR

Infusion System - Epoxy Resin | HP-E120RI...

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 200 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 58,90 EUR

Manometer vertical Vacuum | HP-VZ1180

Manometer standing - class 2.5
Display area -1 bar to 0 bar (Vacuum)
Bar-display (black) / PSI-display (red)
Connection: G 1/4" below
Diameter 50 mm

9,66 EUR