Main page » Vacuum Technology » Perforated Release Film » 44 g/m² Perforated Release Film | HP-RF44/100

Preview: 44 g/m² Perforated Release Film | HP-RF44/100

44 g/m² Perforated Release Film | HP-RF44/100

Mobile Preview: 44 g/m² Perforated Release Film | HP-RF44/100

44 g/m² Perforated Release Film | HP-RF44/100

Product No.:: HP-RF44/100
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-4,9 m²: per 3,27 EUR
5-9,9 m²: per 2,08 EUR
10-24,9 m²: per 1,49 EUR
25-49,9 m²: per 1,18 EUR
50-99,9 m²: per 1,01 EUR
> 99,9 m²: per 0,77 EUR

3,27 EUR

incl. 19% tax excl. Shipping costs

Description

44 g/m² Perforated Release Film | HP-RF44/100

High-tensible perforated Release Film. Ideal for use in vacuum bag / autoclave processing of composites. Suitable for use with polyester, epoxy and phenolic resin systems. Basic purpose of the release film is to ensure the proper release of the helping material use for vacuum bagging. The Release Film is placed directly on the peel ply in contact with the laminate. It separates the laminate from breather / bleeder fabrics, which have no release characteristics.

Material: HDPE
Weight: 44 g/m²
Width: 100 cm

Technical data:

Temperatur resistance:	120°C
Thickness:	45µm
Colour:	Blue, transparent
Elongation at break:	>210%

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Delivery notes for this product:
Delivery up to 1 m² only folded up. More than 5 m² only on roll.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks for the vacuum infusion process:
Vacuum infusion process (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

This product is compatible with (for example):

High performance laminating system HP-E29L

High Performance Laminating System - Epoxy...

The Epoxy-System HP-E29L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 25 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E28L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

from 26,50 EUR

High Performance Laminating System - Epoxy...

The Epoxy-System HP-E111L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 110 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-E110L, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

from 26,50 EUR

Cleaning and degreasing agent - Acetone...

Acetone is a solvent and is usually used to clean tools from resin, that has not yet dried completely. Furthermore it is often used for degreasing surfaces (e.g. fibre glass or carbon fibre).

Cleaning and degreasing agent

from 9,90 EUR

Scissors "OPTIMA" | HP-L1054

Lenght:	28 cm
Blade lenght:	12 cm
Colour:	blue

7,45 EUR

28 cm plastic Stirrer | HP-L1128

Colour:	Black
Material:	Plastic
Size:	28 cm incl hole and retaining hooks

0,95 EUR

This product is similar to:

T-Connector 12/12/12 mm | HP-VZ1080

Push-in T-connector for easy connection
All sides of the same diameter
For tubes with a outside-diameter of 12 mm

5,89 EUR

PU hose for vacuum moulding flexible | HP-VZ1040...

PU hose with high wall thickness and excellent flexibility. Use as resin-carrying line as well as reusable suctionin combination with the vacuum pump HP-VZ1200. Multiple use in combination with our connectors IQS standard.

Available dimensions:
Material:	PU
Außen- Ø :	12 mm
Innen- Ø :	8 mm

3,55 EUR

Stud to close 10 mm | HP-VZ1160

Stud to close up connectors
For connectors with a inside-diameter of 10 mm

1,36 EUR

Connector reducing 12/10 mm | HP-VZ1090

Push-in connector for easy connection
Different outside-diameter (reducing)
For tubes with a outside-diameter of 12/10 mm

4,17 EUR

Customers who bought this product bought also the following products:

158 g/m² Unidirectional 0° Carbonfabric | HP-U158/122C

154 g/m² Unidirectional 0° Carbonfabric...

Construction:	0°
Fibre:	HT-Fibre
Weight:	154 g/m²
Width:	150 cm

11,29 EUR

Manometer vertical Vacuum | HP-VZ1180

Manometer standing - class 2.5
Display area -1 bar to 0 bar (Vacuum)
Bar-display (black) / PSI-display (red)
Connection: G 1/4" below
Diameter 50 mm

9,66 EUR

300 g/m² Unidirektional Carbonfabric | HP-U300/122C...

Construction:	0°
Fibre:	HT-Fibre
Weight:	300 g/m²
Width:	122 cm

23,44 EUR

Core material - Sandwich material - approx....

HP-CORE is a high performance non-woven fabric developed specifically for the Fibre Reinforced Plastics (FRP) industry.

*Please enter below the desired quantity in m²

14,99 EUR