Subscribe to Newsletter

 
 
340 g/m² Unidirectional-Carbonfabric-Tape (40 mm) | HP-U340C/040
340 g/m² Unidirectional-Carbonfabric-Tape (40 mm) | HP-U340C/040
340 g/m² Unidirectional-Carbonfabric-Tape (40 mm) | HP-U340C/040

340 g/m² Unidirectional-Carbonfabric-Tape (40 mm) | HP-U340C/040

Product No.:
HP-U340C/040
ca. 1-3 days ca. 1-3 days (abroad may vary)
Minimum order:
5
Sliding scale prices
5 Meters
per 3,71 EUR
10-20 Meters
per 3,16 EUR
25-45 Meters
per 2,75 EUR
50-95 Meters
per 2,33 EUR
> 95 Meters
per 2,09 EUR
3,71 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

340 g/m² Unidirectional-Carbonfabric-Tape (40 mm) | HP-U340C/040

Construction: 0°
Fibre: HT-Fibre
Weight: 340 g/m²
Width: 40 mm
 
Fibre orientation:
Warp: 4,2 y/cm (12K-800 tex)
Weft: 1,6 y/cm (EC9-34 tex)
 
Technical Data Sheet Carbon Fabric HP-P200C
Areas of application: 
Tanks, pipes, hulls, model marking, boat construction, sport equipment, repairs & reinforcement, ...

► Laminate calculator
Here you can calculate specific values for your application.
Working Notes & Support
Working Notes:
In this instruction you will find tips & tricks for epoxy resins and fabrics in boatbuilding:
Boatbuilding (PDF)

further working notes you will find here


Decision guidance for Epoxy Resins:
Overview Epoxy Resins (PDF)


Working Notes:
Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

This product is compatible with (for example):

Epoxy Adhesive HP-E5K
Adhesive System - Epoxy Resin | HP-E5K
The Epoxy Adhesive System HP-E5K is an unfilled, medium-viscosity combination of resin and hardener with fast reaction time.

Processing time of 5 minutes, applicable from 5°C
from 9,90 EUR
High Performance Laminating Resin Epoxy HP-E56L
High Performance Laminating System - Epoxy...

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

from 5,50 EUR
Mixing tube HP-L4002
Mixing tube for 29g double syringe (5min...
Length:              85mm (13 mixing stages)
Diameter:           fittable (Ø 1 - 4 mm)
1,89 EUR
Casting system resin transparent HP-E50GB
Casting System (transparent) - Epoxy Resin...
  • Transparent, low shrink-casting with tacky-free surfaces
  • Very good flow behaviour (low-viscosity)
  • Cold-hardening, demouldable at room-temperature
  • High fillable casting resin
  • Cause pressure-resistant and impact-resistant (tough) moulds / components with high strength and very less shrinkage

from 5,50 EUR
Light stabilizer / Anti-yellowing additive | HP-BEL91
Light stabilizer / Anti-yellowing additive...
  • BEL91 is added as light stabilizer into ready mixed systems
  • Solution of functional amines

The HP-BEL91 improves anti-yellowing of epoxy and paints significant.

from 4,95 EUR

Customers who bought this product bought also the following products:

280 g/m² Glass Fabric "Finish" Twill | HP-T280/127EF
280 g/m² Glass Fabric "Finish" Twill | HP-T280EF...
Weight: 280 g/m²
Weave: Twill 2/2
Sizing: Finish
Width: 100 cm
9,14 EUR
81 g/m² Glass Fabric "Finish" Plain | HP-P80EF
81 g/m² Glass Fabric "Finish" Plain | HP-P80EF...
Weight: 81 g/m²
Weave: Plain
Sizing: Finish
Width: 127 cm
6,25 EUR
Cotton flocks | HP-BF1
Cotton flocks | HP-BF1
  • Thickener, viscosity control
  • Reinforcement of splices, adhesive beads
  • In combination with glass fiber chips (HP-GS6) for coupling layers in mold making
from 3,50 EUR
Chopped glass fibre | HP-GS3
Chopped Glass Fibres 3 mm | HP-GS3
  • For an increased tensile, compressive and flexural strength
  • Mixture remains flowable
  • For moulding material
  • Reinforcement of gluing spots / adhesive beading
  • In combination with cotton flocks (HP-BF1) suitable for coupling layers in mould making
from 2,59 EUR