Main page » Reinforcement Fabrics » Carbon Fabric » Plain » 160 g/m² Carbon Fabric Plain | HP-P160C

Preview: Carbon Fabric 160g/m² Plain | HP-P160C

160 g/m² Carbon Fabric Plain | HP-P160C

Mobile Preview: Carbon Fabric 160g/m² Plain | HP-P160C

TOP

160 g/m² Carbon Fabric Plain | HP-P160C

Product No.:: HP-P160C
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-2,5 m²: per 24,95 EUR
3-4,5 m²: per 23,50 EUR
5-9,5 m²: per 21,90 EUR
10-24,5 m²: per 20,90 EUR
25-49,5 m²: per 19,50 EUR
50-99,5 m²: per 17,79 EUR
> 99,5 m²: per 16,95 EUR

24,95 EUR

incl. 19% tax excl. Shipping costs

Description

Carbon Fiber Fabric Plain | HP-P160C

Weight: 160 g/m²
Weave: Plain
Width: 100 cm

Yarn type specifications:
Warp: 4 y/cm (3K 200Tex)

Weft: 4 y/cm (3K 200Tex)

Thickness: 0,27 mm
Yarn: 3K Mitsubishi Pyrofil

** The length of the rolls may vary. Therefore it is possible that a position from 10m² consists of several rolls. **

Areas of application:

Modelling, sports equipment making, ship and boat construction, motor sport, orthopaedic technic, ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 192 g/m²
Laminate thickness: 0,26 mm
Laminate weight: 352 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks to produce carbon-design parts:
Carbon Coating (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Carbon Fabric Constructions:

Carbon Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

This product is compatible with (for example):

150 g/m² Bidiagonal carbon fabric | HP-B200C

150 g/m² Bidiagonal carbon fabric | HP-B150C...

Construction:	+/-45°
Fibre:	HT-Fibre
Weight:	150 g/m²
Width:	127 cm

19,64 EUR

Epoxy Resin multi-purpose system 45 min...

The Epoxy-System HP-E45KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with working time (pot life) about 45 minutes. It is versatile for laminating and for bonding / gluing applications.

Bonding, Laminating, Mould Making

from 6,90 EUR

Casting System - Epoxy Resin | HP-E45GA

Foundry patterns, die plates, reproduction patterns
Building small moulds and castings with slightly yellow colour
Encapsulation of decorative elements
Gevelling compound

from 11,50 EUR

Scissors "easypro" stainless steel | HP-L1055...

Length:	28 cm
Colour:	Black / Red

6,37 EUR

Mixing cup 300 ml | HP-L1069

Material:	hard paper with PE coating, round
Volume:	300 ml
Quantity/Package:	25 or 50 pieces per package

0,25 EUR

This product is similar to:

Infusion System - Epoxy Resin | HP-E120RI...

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 200 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 58,90 EUR

Epoxy resin multi-purpose system 45 min (low viscous) | E45L

Multi-Purpose System (low viscous) | BM-E45L...

2K epoxy resin multi-purpose system
Low viscous (thin)
Versatile use
45 min pot life
Processing temperature from 18°C onwards

laminate-, mould making, adhesive, spatula and top coat resin system

from 10,90 EUR

Coating - Laminating System - 1.5kg - Epoxy...

The Epoxy Covering Resin System HP-E30TDS is an unfilled, thixotropic combination of resin and hardener with a medium working time (pot life). For high quality Pondbuilding Coverings.
Available in several colours or clear, adjustable with color paste HP-FP to RAL.

36,90 EUR
24,60 EUR per Kg

High Performance Laminating System - Epoxy...

The Epoxy-System HP-E111L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 110 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

from 26,50 EUR

Customers who bought this product bought also the following products:

145 g/m² Vaccum Mesh | HP-IM145-100

Material:	HDPE
Weight:	145 g/m²
Width:	100 cm

4,14 EUR

PU hose for vacuum moulding flexible | HP-VZ1030...

PU hose with high wall thickness and excellent flexibility. Use as resin-carrying line as well as reusable suctionin combination with the vacuum pump HP-VZ1200. Multiple use in combination with our connectors IQS standard.

Available dimensions:
Material:	PU
Außen- Ø :	10 mm
Innen- Ø :	6,5 mm

3,09 EUR

T-hose connector straight 8/8/8mm HP-VZ1320

T-Push Connector 8/8/8mm HP-VZ1320

- Push t-connector for easy connection
- both sides of the same diameter
- for tubes with a inside-diameter of 8mm

Compatible with vacuum hose:
HP-VZ1010		HP-VZ1040

"Image similar"

1,24 EUR

200 g/m² Carbon Fabric Plain | HP-P200C

Weight:	200 g/m²
Weave:	Plain
Width:	100 cm

28,95 EUR