Subscribe to Newsletter

 
 
315g/m² Unidirectional-Carbonfabric-Tape (50 mm) | HP-U315C/050
315g/m² Unidirectional-Carbonfabric-Tape (50 mm) | HP-U315C/050
Preview: 315g/m² Unidirectional-Carbonfabric-Tape (50 mm) | HP-U315C/050
Preview: 315g/m² Unidirectional-Carbonfabric-Tape (50 mm) | HP-U315C/050
315g/m² Unidirectional-Carbonfabric-Tape (50 mm) | HP-U315C/050
315g/m² Unidirectional-Carbonfabric-Tape (50 mm) | HP-U315C/050
315g/m² Unidirectional-Carbonfabric-Tape (50 mm) | HP-U315C/050
Mobile Preview: 315g/m² Unidirectional-Carbonfabric-Tape (50 mm) | HP-U315C/050
Mobile Preview: 315g/m² Unidirectional-Carbonfabric-Tape (50 mm) | HP-U315C/050

315g/m² Unidirectional-Carbonfabric-Tape (50 mm) | HP-U315C/050

Product No.:
HP-U315C/050
ca. 1-3 days ca. 1-3 days (abroad may vary)
Minimum order:
50
Sliding scale prices
50 Meters
per 1,88 EUR
100-200 Meters
per 1,69 EUR
250-450 Meters
per 1,50 EUR
> 450 Meters
per 1,37 EUR
1,88 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

315 g/m² Unidirectional-Carbonfabric-Tape (50 mm) | HP-U315C/050

Construction: 0°
Fibre: HT-Fibre
Weight: 315 g/m²
Width: 50 mm

Fibre orientation:
Warp: 4,2 y/cm (12K-800 tex)
Weft: 1,6 y/cm (EC9-34 tex)

Technical Data Sheet Carbon Fabric-Tape HP-U315C/025
Areas of application: 
Tanks, pipes, hulls, model marking, boat construction, sport equipment, repairs & reinforcement, ...
► Laminate calculator
Here you can calculate specific values for your application.
Product Safety
Product Safety (GPSR):
Here you will find information for the safe use of carbon fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

315 g/m² Unidirectional Carbonfabric | HP-U315C
315 g/m² Unidirectional Carbonfabric | HP-U315C...
Weight: 315 g/m²
Weave: Plain
Width: 100 cm
26,48 EUR
Casting system resin transparent HP-E50GB
Casting System (transparent) - Epoxy Resin...
  • Transparent, low shrink-casting with tacky-free surfaces
  • Very good flow behaviour (low-viscosity)
  • Cold-hardening, demouldable at room-temperature
  • High fillable casting resin
  • Cause pressure-resistant and impact-resistant (tough) moulds / components with high strength and very less shrinkage

from 5,50 EUR
Digital Table Scale (all steel panel) 5Kg/1g | VZ3006
Digital Table Scale 5Kg/1g | HP-VZ3006
  • Strain Gauge Precision Technology
  • Capacity:        up to 5kg
  • Readability:        1g
  • Display Modes:      g / oz
  • Key with Full Function:  ON/OFF/TARA/ZERO
  • Auto/Manual Shut-Off
  • Powered by AAA Battery (included)
  • Dimension (incl. weighing pan): 18 cm x 12 cm x 8 cm
16,65 EUR
High Performance Laminating Resin Epoxy HP-E56L
High Performance Laminating System - Epoxy...

The Epoxy-System HP-E56L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 55 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

from 5,50 EUR
Scissors "easypro" stainless steel | HP-L1055
Scissors "easypro" stainless steel | HP-L1055...
Length: 28 cm
Colour: Black / Red
6,37 EUR

Customers who bought this product bought also the following products:

Infusion System resin component
Infusion System - Epoxy - Resin component...
The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose. A special feature of this series is a high initial glass transition temperature (Tg) by hardening at room temperature.

Vacuum Infusion, Pressure Injection
from 40,50 EUR
Epoxy infusion resin hardener HP-HTE200GL
Infusion System - Epoxy - Hardener component...
The hardener HP-HTE200GL allows a pot-life of 200 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection
from 18,90 EUR
Epoxy infusion resin HP-HTE300GL
Infusion System - Epoxy - Hardener component...
The hardener HP-HTE300GL allows a pot-life of 300 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection
from 16,50 EUR
Vacuum Flat Channel | HP-VZ1520
Vacuum Flat Channel, 50 mm | HP-VZ1520
Flat channel for vacuum infusion. It consists of a three-dimensional polyester filament core structure wrapped in a non-woven polyester. Very flexible and easy to cut to the appropriate size.

Advantages:
  • No print on the laminate
  • Excellent resin flow
  • Easy application and easy cut
1,82 EUR