Main page » Reinforcement Fabrics » Carbon Fabric » Twill » 420 g/m² Carbon Fabric Twill | HP-T421C

Preview: Carbon Fabric 160 g/m² Twill | HP-T421C

420 g/m² Carbon Fabric Twill | HP-T421C

Mobile Preview: Carbon Fabric 160 g/m² Twill | HP-T421C

420 g/m² Carbon Fabric Twill | HP-T421C

Product No.:: HP-T421C
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-2,5 m²: per 31,89 EUR
3-4,5 m²: per 29,95 EUR
5-9,5 m²: per 28,50 EUR
10-24,5 m²: per 26,78 EUR
25-49,5 m²: per 24,95 EUR
50-99,5 m²: per 23,68 EUR
> 99,5 m²: per 22,25 EUR

31,89 EUR

incl. 19% tax excl. Shipping costs

Description

Carbon Fiber Fabric Twill | HP-T421C

Weight: 420 g/m²
Weave: Twill 2/2
Width: 100 cm

Yarn type specifications:
Warp: 2,6 y/cm (12K 800Tex)

Weft: 2,6 y/cm (12K 800Tex)

Thickness: 0,64 mm

Areas of application:

Ship and boat construction, motor sport, aircraft construction, ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 503 g/m²
Laminate thickness: 0,67 mm
Laminate weight: 924 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

** The length of the rolls may vary. Therefore it is possible that a position of 10m² or more consists of several rolls. **

Working Notes & Support

Working Notes:
In this instruction you will tips & tricks to produce carbon-design parts:
Carbon Coating (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Carbon Fabric Constructions:

Carbon Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of carbon fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

450 g/m² Triax Carbonfabric | HP-T450C

Construction:	+45°/-45°/0°
Fibre:	HT-Fibre
Weight:	450 g/m²
Width:	127 cm

29,63 EUR

Glow in the dark light powder | HP-GLOW

Glow time: up to 10 hours, depending on the amount of light stored or light intensity
Ideal for casting applications such as for example River tables, jewelry floor markings, stair edges, emergency exits, varnishes, furniture etc.
Compatible with many basic materials
Charging by: UV-radiation, daylight, artificial light and many more

from 9,98 EUR

15 mm Laminating brush | HP-L1107

Width:	15 mm
Bristle:	Black China bristle
Stalk:	Wood stalk

0,85 EUR

20 cm plastic Stirrer | HP-L1120

Colour:	Red
Material:	Plastic
Size:	20 cm incl hole and retaining hooks

0,83 EUR

Epoxy Resin multi-purpose system 45 min...

The Epoxy-System HP-E45KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with working time (pot life) about 45 minutes. It is versatile for laminating and for bonding / gluing applications.

Bonding, Laminating, Mould Making

from 6,90 EUR

This product is similar to:

400 g/m² Bidirectional Carbonfabric | HP-B412C...

Construction:	0°/90°
Fibre:	HT-Fibre
Weight:	400 g/m²
Width:	127 cm

23,74 EUR

Scissors "easypro" stainless steel | HP-L1055...

Length:	28 cm
Colour:	Black / Red

6,37 EUR

410 g/m² Bidiagonal Carbonfabric | HP-B415C...

Construction:	+/-45°
Fibre:	HT-Fibre
Weight:	410 g/m²
Width:	127 cm

22,97 EUR

450 g/m² Triax Carbonfabric | HP-T450C

Construction:	+45°/-45°/0°
Fibre:	HT-Fibre
Weight:	450 g/m²
Width:	127 cm

29,63 EUR

Customers who bought this product bought also the following products:

Covering System - Topcoat - Epoxy Resin...

This epoxy-system is an transparent, unfilled combination of resin and hardener with medium working time and low viscosity.

Topcoat, High UV-stability, 40 minutes working time

from 5,50 EUR

Mould Release Agent for Epoxy and Polyester

Mould Release Agent | HP-BM17

Silicon free dispersion of wax in a dissolver mixture
Operating temperature up to 80°C
Sprayable, contains dissolver for epoxy and polyester resin
Suitable for smooth and dense undergrounds and in connection with the Film Release Agent HP-PVA

from 8,90 EUR

Chopped Glass Fibres 6 mm | HP-GS6

For an increased tensile, compressive and flexural strength
Mixture remains flowable
For moulding material
Reinforcement of gluing spots / adhesive beading
In combination with cotton flocks (HP-BF1) suitable for coupling layers in mould making

from 2,59 EUR

Cotton flocks | HP-BF1

Thickener, viscosity control
Reinforcement of splices, adhesive beads
In combination with glass fiber chips (HP-GS6) for coupling layers in mold making

from 3,50 EUR