450 g/m² Triax Carbonfabric | HP-T450C
450 g/m² Triax Carbonfabric | HP-T450C
Construction: Triax +45°/-45°/0°
Weight: 450 g/m²
Width: 127 cm
Width: 127 cm
Fibre orientation:
| +45°: | 150 g/m² (HT-fibre 50K) |
| -45°: | 150 g/m² (HT-fibre 50K) |
| 0°: | 150 g/m² (HT-fibre 50K) |
| Stitching /-type: | 5 g/m² (PES) |
| Total areal weight: | 455 g/m² |
Advantages of Carbonfabric HP-T450C:
- Thickness and weight over the whole fabric´s width is constant
- The surface of filaments are smooth, therefore the fabric is very handy to process
- All filaments are strictly parallel, not twisted to the right or left
- All filaments are sufficiently strained, therefore the final product have a good physical-mechanical
Areas of application:
Wind energy, sport equipment making, ship and boat construction, motor sport, aircraft construction, ...
Calculated data for hand laminate with 40 volume percent fibres:
Resin consumption: 436 g/m²
Laminate thickness: 0,63 mm
Laminate weight: 886 g/m²
► Laminate calculator
Here you can calculate specific values for your application.
Delivery notes for this product:
Standard role length: 63,5 m² / From 64 m² then the total quantity are on minimum 2 roles.
Resin consumption: 436 g/m²
Laminate thickness: 0,63 mm
Laminate weight: 886 g/m²
► Laminate calculator
Here you can calculate specific values for your application.
Delivery notes for this product:Standard role length: 63,5 m² / From 64 m² then the total quantity are on minimum 2 roles.
Working Notes:
In this instruction you will find tips & tricks for epoxy resins and fabrics in boatbuilding:
Boatbuilding (PDF)
further working notes you will find here
Decision guidance for Epoxy Resins:
Overview Epoxy Resins (PDF)
Working Notes:
Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator
Characteristics of triaxial Carbonfabrics:
Triaxial
|
|
