Vacuum Infusion, Pressure Injection - Appoval of DNV GL | Epoxy Resin HP-HE3000GL
The basis of the series HP-E3000GL is an unfilled epoxy-resin,
which is mixable with different hardeners for every individual purpose.
A special feature of this series is a high initial glass transition temperature (Tg) by hardening at room temperature.
T
he use of the hardener HP-E200GL increases the maximum glass transition temperature (Tg MAX) up to 107°C.
The series also has a high transparency so that it is very suitable for visible carbon parts.
The whole system has a statement of approval from the certification body DNV GL.
(Approval/Cert.no.: TAK00000FD, Job ID: 262.1-023615-1, valid until 31.08.2021)
Features & Benefits:
- extremely low viscosity, so it has a very good fibre wet-out
- pot life time can be freely adjusted between 15 minutes (hardener HP-E15GL) and 300 minutes (hardener HP-E300GL)
- glass transition temperature (Tg max) up to 107 °C (hardener HP-E200GL)
- high static and dynamic strength
- pressure injection methods (RTM, RIM,…)
- vacuum-infusion methods (IMC/MTI, RI, VARI, SCRIMP®,…)
- filament winding
- hand laminating
- optical application such as visible carbon parts (hardener HP-E200GL)