Main page » Reinforcement Fabrics » Glass Filament Fabric Silane » Plain » 166 g/m² Glass Fabric "Silane" Plain | HP-P163E

166 g/m² Glass Fabric "Silane" Plain | HP-P163E

Name: 166 g/m² Glass Fabric "Silane" Plain | HP-P163E
SKU: HP-P163E
Price: 5.25 EUR
Availability: InStock

Product No.:: HP-P163E
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-4,9 m²: per 5,25 EUR
5-9,9 m²: per 4,90 EUR
10-24,9 m²: per 4,55 EUR
25-49,9 m²: per 3,85 EUR
50-99,9 m²: per 2,98 EUR
> 99,9 m²: per 2,54 EUR

5,25 EUR

incl. 19% tax excl. Shipping costs

m²:

Add to wish list

Ask about product

Description

Glass Fiber Fabric Silane Plain | HP-P163E

Weight: 166 g/m²
Weave: Plain
Sizing: Silane
Width: 100 cm

Yarn type specifications:
Warp: 12 y/cm (EC9-68 tex)

Weft: 11,5 y/cm (EC9-68 tex)

Areas of application:

Design of models-, sport equipment,
boat-, tank-, and mould making, car-parts, ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 136 g/m²
Laminate thickness: 0,18 mm
Laminate weight: 302 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Delivery notes for this product:
Delivery up to 2,5 m² only folded up. More than 3 m² only on roll.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks by working with glass fiber fabrics and epoxy resins:
Boat Building (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Glass Fabric Constructions:

Glass Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of glass fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

160 g/m² Glass fabric Bidiagonal | HP-B160E...

Construction:	+/-45°
Weight:	160 g/m²
Width:	127 cm

4,71 EUR

Epoxy Resin multi-purpose system 45 min...

The Epoxy-System HP-E45KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with working time (pot life) about 45 minutes. It is versatile for laminating and for bonding / gluing applications.

Bonding, Laminating, Mould Making

from 6,90 EUR

20 cm plastic Stirrer | HP-L1120

Colour:	Red
Material:	Plastic
Size:	20 cm incl hole and retaining hooks

0,83 EUR

Set of 10 brushes | HP-L1003

3 flat brushes 20/25/35 mm
2 round brushes size 2 + 4
3 emaille-paint brush 0/1/2
2 corner brush 25/35 mm

4,70 EUR

Cleaning and degreasing agent - Acetone...

Acetone is a solvent and is usually used to clean tools from resin, that has not yet dried completely. Furthermore it is often used for degreasing surfaces (e.g. fibre glass or carbon fibre).

Cleaning and degreasing agent

from 9,90 EUR

Customers who bought this product bought also the following products:

Paddle roller | HP-PR

Aluminium paddle roller are used for compressing and ventin the laminates.with screw fastening incl. holder and plastic grip.

Suitable for glass fabrics

Available dimensions:
Item-No.:	Diameter:	Width:
HP-PR-13x50	13 mm	50 mm
HP-PR-25x75	25 mm	75 mm
HP-PR-25x150	25 mm	150 mm
HP-PR-30x100	30 mm	100 mm

from 9,50 EUR

Epoxy infusion resin hardener HP-HTE200GL

Infusion System - Epoxy - Hardener component...

The hardener HP-HTE200GL allows a pot-life of 200 minutes. The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose.

Vacuum Infusion, Pressure Injection

from 18,90 EUR

Infusion System - Epoxy - Resin component...

The basis of the series HP-E3000GL is an unfilled epoxy-resin, which is mixable with different hardeners for every individual purpose. A special feature of this series is a high initial glass transition temperature (Tg) by hardening at room temperature.

Vacuum Infusion, Pressure Injection

⚠️ Important Notice – Shipping in Germany only to Business Customers:
Due to legal regulations (ChemVerbotsV), this product may be shipped within Germany only to business customers. Foreign customers can receive this product via shipping. A technically comparable alternative is our HP-HE3000RI, this epoxy resin can be shipped to private customers in Germany without any restrictions.

Sales to international customers, whether private or commercial, are possible without any restrictions.

from 40,50 EUR

390 g/m² Glass Fabric "Silane" Twill | HP-T390E...

Weight:	390 g/m²
Weave:	Twill
Sizing:	Silane
Width:	100 cm

8,66 EUR