200 g/m² Carbon Fabric Spread Tow, Twill, incl. EP-Binder | SP-T200/127CE
Spread Tow Carbonfabric 200 g/m², twill 2/2, incl. EP-Binder
** special item from bigger industrial production. B-Quality / mostly good quality also suitable for visible parts. **This carbon fabric is finished on one side with an EP binder (approx. 10 - 15 g/m²).
Advantages:
► No fraying when cutting
► The fabric can be preformed by heating
This Spread-Two-Carbon-Fabric is a fabric with a standard 3K spreaded fibres. It is very thin through the spreading of the single filaments but nevertheless is the fabric very closed. You achieve an increased strength and a lower resin consumption because of the low fibre bending. It is ideal for design applications because of its’ unique carbon look.
Technical Data
Weight: 200 g/m²
EP-Binder: approx. 10-15 g/m²
Weave : twill 2/2
Width: 127 cm
Warp: 5 threads/cm (3K Mitsubishi Pyrofil)
Weft: 5 threads/cm (3K Mitsubishi Pyrofil)
Areas of applicaton:
Modelling, sports equipment making, visible parts, ship and boat construction, motor sport, orthopaedic technology, ...
Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 240 g/m²
Laminate thickness: 0,33 mm
Laminate weight: 440 g/m²
** The length of the rolls may vary. Therefore it is possible that a position from 10m² consists of several rolls**
► Laminate calculator
Here you can calculate specific values for the vacuum infusion.
Working Notes:
In this instruction you will tips & tricks to produce carbon-design parts:
Carbon Coating (PDF)
Laminate Calculator:
Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator
Laminate Calculator
Characteristics of Carbon Fabric Constructions:
Carbon Fabrics are available in different constructions. The important characteristics you will find below:
Plain
|
|
Twill
|
|
Satin
|
|
