Subscribe to Newsletter

 
 
Carbon Fabric 245 g/m² Twill | HP-T240/150C
Carbon Fabric 245 g/m²
Carbon fabric defect
Preview: Carbon Fabric 245 g/m² Twill | HP-T240/150C
Preview: Carbon Fabric 245 g/m²
Preview: Carbon fabric defect
245 g/m² Carbon Fabric Twill | SP-T240/150C
Carbon Fabric 245 g/m² Twill | HP-T240/150C
Carbon Fabric 245 g/m²
Carbon fabric defect
Mobile Preview: Carbon Fabric 245 g/m² Twill | HP-T240/150C
Mobile Preview: Carbon Fabric 245 g/m²
Mobile Preview: Carbon fabric defect

245 g/m² Carbon Fabric Twill | SP-T240/150C

Product No.:
SP-T240/150C
Shipping time:
ca. 1-3 days ca. 1-3 days (abroad may vary)
Sliding scale prices
1-2,5 m²
per 27,14 EUR
3-4,5 m²
per 25,51 EUR
5-9,5 m²
per 23,99 EUR
10-24,5 m²
per 22,80 EUR
25-49,5 m²
per 21,51 EUR
50-149,5 m²
per 20,47 EUR
> 149,5 m²
per 19,80 EUR
instead 33,92 EUR
only 27,14 EUR
You save 20%

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

Carbon Fiber Fabric Twill | SP-T240/150C

** 2nd choice with slight defects, shifts or worn warp threads. Still well suited for constructionasl applications **
** we point out that this 2nd choice is not entitled for complaint **

Weight: 245 g/m²
Weave: Twill 2/2
Width: 150 cm
Yarn: 3K HT-fibre
 
Yarn type specifications:
Warp: 6 y/cm (3K  200Tex)
Weft: 6 y/cm (3K  200Tex)
Thickness: 0,35 mm
 
Technical Data Sheet Carbon Fabric HP-T240/150C
 
Areas of application: 
Modelling, sport equipment making, ship and boat construction, motor sport, carbon design, aircraft construction, ...
 
Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 288 g/m²
Laminate thickness: 0,39 mm
Laminate weight: 528 g/m²

** The length of the rolls may vary. Therefore it is possible that a position of 10m² or more consists of several rolls. **

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.
Working Notes & Support

Working Notes:
In this instruction you will tips & tricks to produce carbon-design parts:
Carbon Coating (PDF)

 
Laminate Calculator:
Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

 

Characteristics of Carbon Fabric Constructions:

Carbon Fabrics are available in different constructions. The important characteristics you will find below:
 
Plain
  • The simplest weave
  • Very slip-resistant
  • Bad drapability
  • Suitable for flat plates or easy moulds

Twill
  • Diagonally running lines are characteristic
  • Better drapability than plain weave
  • Less slip-resistant
  • Suitable for complicated geometries

Satin
  • Suitable for complicated geometries
  • Very good drapability
  • Low slip-resistance
  • Less mesh crossing, therefore strength in the laminate
  • Leaves a very smooth surface
Product Safety
Product Safety (GPSR):
Here you will find information for the safe use of carbon fibres:
Product information for safe handling (PDF)

Customers who bought this product bought also the following products:

High-Gloss Release Agent Carnauba Wax Paste
High-Gloss Release Agent - 700g Carnauba...
  • Wax release agent for brilliant high glossy finish in moulds with smooth, non porous surfaces (metal, plastics, varnished wood or MDF)
  • Suitable for most composites mould applications with solvent free epoxy and polyester resins
  • Primer for film release agent HP-PVA
  • High-gloss release agent for working with In-Mould Coating HP-IMC (HP-Textiles)
27,95 EUR
39,93 EUR per Kg
Aramid Fabric 310 g/m² Twill - T310A
310 g/m² Aramid Fabric Twill | SP-T310A
Weight: 310 g/m²
Weave: Twill 2/2
Width: 100 cm
instead 31,89 EUR
only 23,92 EUR
You save 25%
Standard laminating Resin Epoxy HP-E55L
Laminating System - Epoxy Resin | HP-E55L...

The Epoxy-System HP-E55L is an unfilled, low viscous, 2-component combination of resin and hardener with a processing time of 55 minutes.

These are low-priced standard laminating resins with good dimensional stability and impregnating behaviour.

from 5,50 EUR