280 g/m² Glass Fabric "Finish" Plain | HP-P280EF

Product No.:: HP-P280EF
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-2,9 m²: per 9,14 EUR
3-4,9 m²: per 8,76 EUR
5-9,9 m²: per 8,38 EUR
10-24,9 m²: per 7,62 EUR
25-49,9 m²: per 6,85 EUR
50-99,9 m²: per 6,09 EUR
> 99,9 m²: per 5,52 EUR

9,14 EUR

incl. 19% tax excl. Shipping costs

Description

Glass Fiber Fabric Finish Plain | HP-P280EF

Weight: 280 g/m²
Weave: Plain
Sizing: Finish
Width: 100 cm

Yarn type specifications:
Warp: 7 y/cm (3x EC9-68 tex)

Weft: 7 y/cm (EC11-204 tex)

Areas of application:

Design of models-, sport equipment, boat-, tank- and mould construction, car-parts, ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 232 g/m²
Laminate thickness: 0,31 mm
Laminate weight: 514 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Delivery notes for this product:
Delivery up to 2,5 m² only folded up. More than 3 m² only on roll.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks by working with glass fiber fabrics and epoxy resins:
Boat Building (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Glass Fabric Constructions:

Glass Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

Customers who bought this product bought also the following products:

Covering Colour Pigments | FD

The opaque colour pigments of the HP-FD series are used for colouring layers (gel and topcoats). They are suitable for laminating and casting resins.

Suitable for unsaturated polyester resins, epoxy resins, vinylester, polyurethan.

from 2,90 EUR

Covering System - Gelcoat - Epoxy Resin...

This epoxy-system is an transparent, unfilled combination of resin and hardener with short working time and medium viscosity.

Topcoat, 25 minutes working time

from 7,90 EUR