Main page » Reinforcement Fabrics » Carbon Fabric » Twill » 420 g/m² Carbon Fabric Twill | HP-T421/120C

Preview: Carbon Fabric 420 g/m² Twill | HP-T421C

420 g/m² Carbon Fabric Twill | HP-T421/120C

Mobile Preview: Carbon Fabric 420 g/m² Twill | HP-T421C

420 g/m² Carbon Fabric Twill | HP-T421/120C

Product No.:: HP-T421/120C
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

on request

Ask about product

Description

Carbon Fiber Fabric Twill | HP-T421/120C

Weight: 420 g/m²
Weave: Twill 2/2
Width: 120 cm

Yarn type specifications:
Warp: 2,6 y/cm (12K Toray T700SC 50C 800Tex)

Weft: 2,6 y/cm (12K Toray T700SC 50C 800Tex)

Thickness: 0,64 mm

Areas of application:

Ship and boat construction, motor sport, aircraft construction, ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 503 g/m²
Laminate thickness: 0,67 mm
Laminate weight: 924 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Delivery notes for this product:
** The length of the rolls may vary. Therefore it is possible that a position of 10m² consists of several rolls. **

Working Notes & Support

Working Notes:
In this instruction you will tips & tricks to produce carbon-design parts:
Carbon Coating (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Carbon Fabric Constructions:

Carbon Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of carbon fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

Epoxy Resin multi-purpose system 45 min...

The Epoxy-System HP-E45KL is an unfilled, medium-viscous, chemical resistant combination of resin and hardener with working time (pot life) about 45 minutes. It is versatile for laminating and for bonding / gluing applications.

Bonding, Laminating, Mould Making

from 6,90 EUR

400 g/m² Bidirectional Carbonfabric | HP-B412C...

Construction:	0°/90°
Fibre:	HT-Fibre
Weight:	400 g/m²
Width:	127 cm

23,74 EUR

14 ltr. Bucket | HP-L1050

Bucket natur with metal hanger
Volume: 14 ltr.
Suitable for mixing polyester or epoxy resin

4,90 EUR

Nitrile-Gloves "powdered"

Quality:	Nitrile (high quality & resistant)
Size:	L, XL
Colour:	Blue or White

from 3,24 EUR

Scissors "OPTIMA" | HP-L1054

Lenght:	28 cm
Blade lenght:	12 cm
Colour:	blue

7,45 EUR

Customers who bought this product bought also the following products:

Mould Covering System, black - Epoxy Resin...

The Epoxy Resin System HP-E30FB is an aluminium-filled, high-viscosity combination of resin and hardener with high hardness.

Mould covering system, 30 minutes working time

from 28,90 EUR