4 kg Epoxy Priming Resin 35 min (low viscous) | HP-E35GS
4 kg Epoxy Priming Resin 35 min (low viscous) | HP-E35GS
The Epoxy System HP-E35GS is an unfilled, low-viscosity combination of resin and hardener with high adhesion to several surfaces.
Features & Benefits:
- Water barrier
- Deep impregnation
- Pore filling
- Solidifies underground
- High adhesion even on damp substrates
- Substrate preparation in system setup with E30RB or E30VB
Field of application:
- Mineral, wood-bounded and metallic substrates
- Residual moisture of substrate max. 6 - 8 %
Application:
- Consumption: approx. 150 - 250 g/m², depending on the substrate
- HP-E35GS can be applied using a paint roller or rubber squeegee
Use as a deep primer:
In combination with our epoxy thinner (XB), the primer system can be used as a deep primer. For this purpose, 5 - 10% thinner (depending on the substrate) must be added to the mixture
Technical Data Epoxidharz HP-E35GS
- Pot life: 35 min
- Mixing Ratio (by weight): 100 parts resin : 60 parts hardener
- Mixed Viscosity: low viscous
Working Notes Epoxidharze
Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.Download:
Practical tips for epoxy resins (PDF)
Hazard Statements
Resin
Warning
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
Hardener
Danger
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.
