Main page » Reinforcement Fabrics » Carbon Fabric » Twill » 245 g/m² Carbon Fabric Twill | HP-T240/125C

Preview: Carbon Fabric 160 g/m² Twill | HP-T240/125C

245 g/m² Carbon Fabric Twill | HP-T240/125C

Mobile Preview: Carbon Fabric 160 g/m² Twill | HP-T240/125C

245 g/m² Carbon Fabric Twill | HP-T240/125C

Product No.:: HP-T240/125C
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-2,5 m²: per 33,69 EUR
3-4,5 m²: per 31,95 EUR
5-9,5 m²: per 29,95 EUR
10-24,5 m²: per 28,50 EUR
25-49,5 m²: per 26,60 EUR
50-124,5 m²: per 24,95 EUR
> 124,5 m²: per 23,95 EUR

33,69 EUR

incl. 19% tax excl. Shipping costs

Description

Carbon Fiber Fabric Twill | HP-T240/125C

Weight: 245 g/m²
Weave: Twill 2/2
Width: 125 cm

Yarn type specifications:
3K Mitsubishi Pyrofil TR30S
Warp: 6 y/cm (3K 200Tex)

Weft: 6 y/cm (3K 200Tex)

Thickness: 0,35 mm

Areas of application:

Modelling, sport equipment making, ship and boat construction, motor sport, carbon design, aircraft construction, ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 288 g/m²
Laminate thickness: 0,39 mm
Laminate weight: 528 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

** The length of the rolls may vary. Therefore it is possible that a position of 10m² consists of several rolls. **

Working Notes & Support

Working Notes:
In this instruction you will tips & tricks to produce carbon-design parts:
Carbon Coating (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Carbon Fabric Constructions:

Carbon Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

This product is compatible with (for example):

Mould Covering System, black - Epoxy Resin...

The Epoxy Resin System HP-E30FB is an aluminium-filled, high-viscosity combination of resin and hardener with high hardness.

Mould covering system, 30 minutes working time

from 28,90 EUR

Scissors "easypro" stainless steel | HP-L1055...

Length:	28 cm
Colour:	Black / Red

6,37 EUR

Spiral bristle roller | HP-SBR

Aluminium spiral bristle roller are used for compressing and ventin the laminates.with screw fastening incl. holder and plastic grip.

Suitable for uneven surfaces and thin glass fabrics

Available dimensions:
Item-No.:	Diameter:	Width:
HP-SBR-30x50	30 mm	50 mm
HP-SBR-30x75	30 mm	75 mm
HP-SBR-30x100	30 mm	100 mm
HP-SBR-30x150	30 mm	150 mm

from 9,90 EUR

200 g/m² Bidiagonal carbon fabric | HP-B200C...

Construction:	+/-45°
Fibre:	HT-Fibre
Weight:	200 g/m²
Width:	127 cm

18,45 EUR

Customers who bought this product bought also the following products:

Cotton flocks | HP-BF1

Thickener, viscosity control
Reinforcement of splices, adhesive beads
In combination with glass fiber chips (HP-GS6) for coupling layers in mold making

from 3,50 EUR

Carbon Fabric 160 g/m² Twill | HP-T240/050C

50cm - 245 g/m² Carbon Fabric Twill (Width:...

Weight:	245 g/m²
Weave:	Twill 2/2
Width:	50 cm

33,69 EUR

600 g/m² Carbon Fabric Twill | HP-T600C

Weight:	600 g/m²
Weave:	Twill 2/2
Width:	100 cm

45,16 EUR

High performance laminating system HP-E29L

High Performance Laminating System - Epoxy...

The Epoxy-System HP-E29L is an unfilled, low viscous, 2-component combinations of resin and hardener with a processing time of 25 minutes.

Compared to standard resins, our high performance resins show faster curing processes. The laminates have distinctive static and dynamic strengths and they are higher temperature resistance.

from 26,50 EUR