Main page » Reinforcement Fabrics » Glass Filament Fabric Finish » Twill » 194 g/m² Glass Fabric "Finish" Twill | HP-T194EF

194 g/m² Glass Fabric "Finish" Twill | HP-T194EF

Name: 194 g/m² Glass Fabric "Finish" Twill | HP-T194EF
SKU: HP-T194EF
Price: 7.56 EUR
Availability: InStock

Product No.:: HP-T194EF
Shipping time:: ca. 1-3 days (abroad may vary)
Stock:: m²

Sliding scale prices

1-2,9 m²: per 7,56 EUR
3-4,9 m²: per 7,25 EUR
5-9,9 m²: per 6,95 EUR
10-24,9 m²: per 6,35 EUR
25-49,9 m²: per 5,74 EUR
50-126,9 m²: per 5,14 EUR
> 126,9 m²: per 4,38 EUR

7,56 EUR

incl. 19% tax excl. Shipping costs

m²:

Add to wish list

Ask about product

Description

Glass Fiber Fabric Finish Twill | HP-T194EF

Weight: 194 g/m²
Weave: Twill 2/2
Sizing: Finish
Width: 127 cm

Yarn type specifications:
Warp: 14 y/cm (EC9-68 tex)

Weft: 14 y/cm (EC9-68 tex)

Areas of application:

Design of models, sport equipment, boat-, tank- and mould construction, car-parts, ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 160 g/m²
Laminate thickness: 0,21 mm
Laminate weight: 354 g/m²

► Laminate calculator
Here you can calculate specific values for the vacuum infusion.

Delivery notes for this product:
Delivery up to 2,5 m² only folded up. More than 3 m² only on roll.

Working Notes & Support

Working Notes:
In this instruction you will find tips & tricks by working with glass fiber fabrics and epoxy resins:
Boat Building (PDF)

Laminate Calculator:

Here you can calculate specific values for different fibers, resins and processes:
Laminate Calculator

Characteristics of Glass Fabric Constructions:

Glass Fabrics are available in different constructions. The important characteristics you will find below:

Plain

The simplest weave
Very slip-resistant
Bad drapability
Suitable for flat plates or easy moulds

Twill

Diagonally running lines are characteristic
Better drapability than plain weave
Less slip-resistant
Suitable for complicated geometries

Satin

Suitable for complicated geometries
Very good drapability
Low slip-resistance
Less mesh crossing, therefore strength in the laminate
Leaves a very smooth surface

Product Safety

Product Safety (GPSR):
Here you will find information for the safe use of glass fibres:
Product information for safe handling (PDF)

This product is compatible with (for example):

160 g/m² Glass fabric Bidiagonal | HP-B160E...

Construction:	+/-45°
Weight:	160 g/m²
Width:	127 cm

4,71 EUR

Adhesive System - Epoxy Resin | HP-E5K

The Epoxy Adhesive System HP-E5K is an unfilled, medium-viscosity combination of resin and hardener with fast reaction time.

Processing time of 5 minutes, applicable from 5°C

from 9,90 EUR

Casting system resin transparent HP-E50GB

Casting System (transparent) - Epoxy Resin...

Transparent, low shrink-casting with tacky-free surfaces
Very good flow behaviour (low-viscosity)
Cold-hardening, demouldable at room-temperature
High fillable casting resin
Cause pressure-resistant and impact-resistant (tough) moulds / components with high strength and very less shrinkage

from 5,50 EUR

Covering System - Topcoat - Epoxy Resin...

This epoxy-system is an transparent, unfilled combination of resin and hardener with medium working time and low viscosity.

Topcoat, High UV-stability, 40 minutes working time

from 5,50 EUR

Customers who bought this product bought also the following products:

Vacuum pump 220V | HP-VZ1200

Motor 220V / 50Hz
Weight 5,4 kg
Max. vacuum: 0,933 bar relative (complies to 20mbar absolute), (correspond to a pressure of more than 10 tons/m²)
Max. efficency by barometic pressure: 67 litre / min (= 4 m³/h)
Suitable for continuous operating range between 2 and 500 mbar absolute

889,50 EUR

Spray adhesive 400 ml | HP-FIX400

To fix reinforcing fabrics (carbon, glas, aramid, …) core materials or vacuum aids in place
Application in combination with the epoxy resins from HP-Textiles
Excellent spray control with adjustable spray button and dosage valve
Bonding wood, textiles, rubber, foams, many synthetic materials, paper and other base materials

11,84 EUR
11,84 EUR per pcs.

Infusion System - Epoxy Resin | HP-E120RI...

The injection- / infusion-resins of the series HP-E3000RI show very low viscosities,
what supports excellent wet-out and flow properties. The hardener HP-E30RI allows a pot-life of 200 minutes. The series is usable for hand-laminating too.

Vacuum Infusion, Pressure Injection

from 58,90 EUR